Separate names with a comma.
My opinion is,spin the blower 35to40% over.Stipping the blower will help but is negligible.540 ci could use some overdrive,especialy 1/8 mile racing.
If it is bronze I might be able to help. Dale-970-302-1232
Whats the difference between the C4000 and the 2055 compound tires?
Did you advance the cam, and how much? Cam timing has alot to do with valve clearance.Lobe separation number usually =Straight up. +advance.
I think history will show that most good running cars use a rear gear that is calculated to the max engine rpm deemed possible at the finish line.
Alot of it has to do with giving the engine extra air at idle. Without them you would have to have the injector blade opening alot wider.Guys...
Is the tank at the front of the car and wedge shaped? There's alot of downforce at 200 mph.
Minimum 3" clearance from front of car to 12" behind centerline of front axle. The remainder of the car 2" except oil pan and headers where...
Hey Dustin,I was watching the Conan O'Brian Show and heard him plug your superchargers the other night. He said the nightrider car was Whipplecharged.
I like your idea Erik, but I think there's too much tradition with the blowers. I do have a idea to slow top fuel classes, have a spec fuel...
Just make sure you keep your spark plug gap close (015 to 018)
I'm all for competition in the blower market, but the rules on the length,diameter, and helix angle of the high helix roots style blowers has in...
I know when I flow a fuel system on my flow bench 10 degrees change in fluid temp changes pressure by a fair amount.
My Dad said many years ago when he had seen all the money I'd spent trying to get my car to go faster:(That's the trouble with that racing junk,...
I've found that the difference between setting the timing with the mag trigger @ say 25 degrees and then phasing the rotor to exactly the center...
The motor plates have to match the design of the frame. A Hadman chassis might have a different frame rail location than say a McKinney chassis.
I have cast and built sheet metal manifolds for my own engine, and have studied several popular designs and have concluded that with 40 lbs. of...
This exact rotor phasing can only be done when a crank trigger is used, not the mag trigger.
Ya, but safety parts don't make you go faster! But seriosly I'm all for safety,especially now that my son drives our car,but to what ends do we...
Noel, so you say there is no more incidence of breaking off the valve stem on titanium valves at the keeper groove with your lash-locks than with...
