Separate names with a comma.
Leave in the .075 Jet?
So I should have that check opening at 35-40 psi with what jet? And move the high speed to behind K valve in port nozzle line? Then what about a...
I agree it wont open at all till about 1000ft then limits fuel to entire system
Also anyone have a good used Blower Budget is 6K . Would like 3 atmospheres at least.Planned from start to upgrade the unit I have from day one...
The check shown in actual photo is set up to open at 105 and has .075 jet. it was installed in this location by FIE outta the box. I added the...
This check is 110 with .075 and was installed in this location from Spud.
[ATTACH] [ATTACH]
Also tried to send picture of actual fuel system but its too large to be accepted 1.29 Mb
Ok guys here is a pic of my fuel setup. From what im seeing the part spud has shown on the fuel schematic as the High Speed (105)psi and .075 jet...
High speed set to open at 105 psi with a .075 jet Usually only opens around 1000 ft. does have some leakage at lower pressure (at least with...
Sorry guys I am not ignoring anyones advice, You guys are the GURUS Im a rookie. That being said will post a pic but my loop is just a return to...
Is there anyone near the Pittsburgh Area that I could possibly pay to help me with this?
Only one Jet by the way
Well we tried more cylinder pressure lost 8mph in1/8. loaded it up and came home. I have an offer from a co-racer to let me bolt on his LB22 and...
well guys Thanks so much for the help. I advanced cam 8 degrees and now I have 150 psi cranking cylinder pressure. we are thinking that ought to...
Yessir i understand i do have a loop but it is no a sizer just returns to inlet
Keystone Track elevation is 1177ft
Did you see the 104 psi cranking cylinder pressure?
Keystone Raceway Park
