Separate names with a comma.
just like the msd mag kill switch mike mine has never failed I zip tie it to the blower bag by the lower strap but I don't race like you guys
exhaust is closing and intake is opening on overlap what is the minimum clearance one can have between valves this is a noonan super 600 2.550...
header flanges are different(same bolt pattern) intake will have to be port matched or buy theirs im doing mine now
wtb 1480 yoke to fit a strange ultra case 3rd member also need billet u bolts I will need 2 yokes thanks duane
what ratios on the lenco drive do you have the other air pod and gear set
all I want for Christmas is: profiler 10x heads if they fit my .100 tall bae cam to match heads lightened or new car carbon wheelie bars carbon...
pro extreme car 2560 lbs runs 3.69 to 3.74 most time brad 5 lencodrive nxs converter 128 od psi c has any one tried a 1.18x1.18x5.00 3 speed for...
trying to save weight p and p dry sump pump can i remove gears or buy a plate to make this a wet sump pump
this stuff must go make offers or a package for all all great shape or ill take it back (refund) i run a converter and will never run a clutch...
when you loose a lash cap and mushroom the tip, what do you do to make next round with out putting a valve in it I tried to file around it but...
trans my 2005 wont go into gear sometimes I just turn it off and on again It must be seeing something it doesn't like I think its air not...
33 gallon pump I was wondering what kind of a snowmobile that was and how much boost it had ive done this 3 times and the rods were junk each...
2 wire is crank sensor 3 wire is tdc for reading timing (5v/signal return/ground type I think )
watergrains/wheelspeed yes to much wheel speed at 1.00 seconds I needed less at .80 to 1.20 probably but really needed more in 60 ft and...
flow 8000=14.39gpm@ 52 psi @2500ft and 107 water grains 60ft, 1.01, .998, added timing down low took fuel out .938 , then .938 sunday was 500...
how much timing should be added when water grains increases brad fat head automatic c screw promod 10.6:1 128 od currently 25 degrees total we...
bill past away tuesday night wednsday morning in his sleep bill was the best teacher for all blown alcohol promod from chassis ,clutch ,...
oil pressure make sure the inlet and outlet at the filter are correct
so 26400rpm at 10500 x 2.50= 26250 anybody tried that
