Separate names with a comma.
I run crank supports on both BBC's (studs and nuts, no loctite) and have never had this issue. Might there be something elsecausing this....
Anyone on here have experience with twin turbo BBC? Looking for some info on maybe going a different direction from blower motor. e-mail outside...
I have run a couple of tall deck Bowtie blocks and it seems that they tend to crack between the bore and the head bolt hole--number 8 cylinder on...
So, what you are saying is on a standard helix blower is that you really only want to have the rotors spinning at the 9000 RPM for best...
Gluing both sides defeats the purpose of his question--to be able to take off intake without destroying gasket everytime . I use the Fel-Pro and...
And they do run hard!!!!!!!!! JW
There is a friend of mine (truck puller) in Michigan who made his own block (from steel, though) that is Chevy based. He might be of help if you...
The Indy manifold is a good choice as is moving the blower back. Couldn't afford to do it last year--that happens when you break them 3 or 4...
Welcome to my world--try running two BBC's with your same type of setup. I don't have the answers why. I just know I fuel the heck out of #2 and...
Considering some better heads and would like advice from y'all's experience. I would like to be able to stay with my iron blocks and rotating...
I have a Milodon on one and a Keith Black on the other--both BBC, 14-71 and I also use the Pioneer front mag drive. The Pioneer works well with...
I have two blown BBC iron block--Bowtie and World--motors with aluminum heads, 14-71's at 46.5% over with Mellings hi-volume pumps, 50 wt Brad...
Don G. normally has a couple of used ones on the shelf. But, you can call Bob or Muffy at J&S Repair in Michigan (810-664-7270). They normally...
For a cheap and quick temp read, (if you want fairly specific numbers) go to a wood stove shop and get a smokestack temp gauge and put it on the...
Don Gerardot, Monroeville Indiana 260-623-3048 JW
From the ground up, I would give Dan at Advanced Chassis in Antwerp, Ohio a call. They do impressive work and have their share of winners in...
Have run both styles on Bowtie blocks. When using stock caps the block was filled. The racer I sold it to broke a trans, overrevved and broke a...
$45000 trailer Here is my scam: I advertised a 48 foot Haulmark fifth wheel with living quarters for sale. Got an e-mail wanting to know how...
It was 533 CI with the SSI 14-71 straight. Boost numbers are from 22 to 35 depending how how hard the motor loads. The mag was checked at the...
I know that Gerardot can get mag welded. Not sure where you are located, but give him a call. JW
