Separate names with a comma.
Hey JT, are you running a F6 injection hat from Jeff Fagala? For the record, we've run Childs&Albert and BRC but Howards are definitely our #1...
Racer 360 I do. In tractorpulling a run lasts about 12 seconds and the RPM is pretty well maintained, for instance, if I could make every run at...
RPM and recipricating weight (pistons, rods etc) are the 2 big contributors to rod life. The rest has its effect also but it's not as substantial....
With this changed atomization,,, Is it safe to simply reverse them and not change the fuel settings or does a guy need to give it more or less fuel?
Disco, When you say "all the mods", can you ellaborate? Who did the mods and are they the lastest and greatest from SSI or is it above and...
In my experience I have never spun my blowers too fast. I've dyno tested LF HH K-8's 8-71's up to 68% overdrive at about 7000 engine RPM and I...
Theoretically speaking you can figure about 29 cid per inch of rotor. So an 8-71 = 16"x29=about 464cid/rev and a 14-71 = 19" long rotor x 29=...
Remember there is now also the "big" diameter rotors. We have SSI F-2 rotors 8-71 HH and they equate to about 560 cid/rev. But these numbers are...
I'll throw a monkey wrench in this. When I built my flowbench I was very particular on the fact that my port nozzles were working against boost....
I agree, but doesn't it become cost prohibitive?:confused:
I've been trying to figure this out over the last couple years also. What I do know is Fred Mandolini and Brian Knox of Sassy Racing Engines put...
Evidently tractorpulling is enough of a different load. We run about 1.3 BSFC, these are BBC's, Dart 360's, SSI HH F-2 8-71's, SM IV. I can't...
There is the whole different OD thing when talking about BB Chevy's, CNC blocks vs not CNC'd. They are 2 different part numbers.
Why does it seem that more alky blown motors inject in the intake manifold runners vs injecting right by the intake valve like so many NA...
I have Kolbeco K-9 billet rotored LittleFields, high-helix front discharge with plugged rotors. These are in very good shape. Supposedly a guy is...
What's e-commerce? Give me an example.
The above listed all have very good reputations. Dennis Pirano in Texas does good work also. We have our own fuel flowbench and do our own work.
We've run blown BBC's since mid 70's with 4 on each side.:)
compare Whats the difference between NGK #'s 6061 and B9ES? I've heard some healthy HP gains after going to 6061's. How is that...
others Computech also makes one that is just what your talking about. This past season I set one up for another guy. I was really impressed with...
