Separate names with a comma.
I'm sure you guys can help with this even though this is a solid frame website...I've got two tube chassis camaros with Hoosier tires. They are...
We sent a KB block back to them for repair. It was poorly saddled on the mains and needed to be reworked. Tom told us worst case would be 1018.00...
We're running a 540 KB Olds on the dyno with a 14-71 hi helix retro@34%over. It makes 20 psi @5000rpm and flatlines all the way to 6200rpm. We had...
If anybody deserved to go out of business it was that outfit. Customer service sucked and the prices were high. I adapted a Summer bro drive to my...
Any suggestions on somebody to saddle a kb olds block. We're in the midwest.
Keith,i'll post when we figure it out...we're not going to quit until it makes 2000hp or its scattered across the dyno cell. Mike
Running a blown alky KB olds on the dyno. We have a titan pump with the high pressure spring,12 qt olsen pan,3qt accumulator and Brad Penn 20/50...
Just checked our 540 KB/Olds. It made about 60 psi. Leaked less than 10%. Checked the degree on the cam,it was fine. We have run the same...
We ran a combination a lot like yours except it was a 526 incher with a 110 pump. 3000lb car with a glide. We ran the blower 34% over(about...
We talked to Jim Oddy about the topend oiling. He spent a bunch of dyno time using clear valve covers and stuff trying to develop wet sump Chevys...
Thanks for the help..I'll see what Isky says tomorrow and most likely get out the file.
The engine is still on the stand so we have been turning and priming like crazy. Unfortunately, we are familiar with lifter oiling circuits due to...
BBC big chief,Titan wet sump, priming with a drill motor..a lot! I think we might need the oil groove mod on the lifters.
