Separate names with a comma.
We've broken 2 exhaust springs on a KB/Olds blown promod. One was at idle when they were new..figured it was a flaw. After 7 passes with some...
Mag-4 is a joke. We switched to a promag 12 and couldn't be happier.Using 24 volts it starts like a street car and burns a lot more fuel.BTW our...
We've run a bunch of passes with a 3100lb car ,blown bbc with glide in the 7.50's. Severe tire shake most of the time. Our Trans specialties glide...
Most i've seen use a mandrel out of the front of the crank support. The trend seems to be towards multistage prostock style pumps that actually...
Switching a promod from a hemi to blown alky Olds setup. Any suggestions on the crank CL to the ground. The hemi was running really high...about...
You have some serious parts except for the block. It will be a nonstop headache. We pushed a stock 454 to 1700hp with splayed main caps and...
I run narrowed V series clevites. See the other KB olds posts for our oil system setup. Mike
you've got problems. We run a 12qt olsen with a titan pump(big spring) and a 3 qt accumulator.15 qts of Redline 50wt. We put our own restrictors...
we run .0035-.00375 main clearance on a solid block with steel caps. It works but we're going to try around .004 next year.Not sure on your second...
It's not really that complicated. Get as close as you can afford to a Kobelco high helix superman or a psi. They are small inlet,around 10 inches,...
Can anybody give me a baseline tuneup for a 540 KB Olds big chief with a k-9 superman 14-71 and a 990 fuel pump. I'm running a junk Kuhl 14-71...
We ran back to back tests with Brad Penn 50wt versus Redline racing 50. We saw a substantial improvement on the main bearings. We have been...
Thanks for all the advice guys. Claude the 44 inch is the intersect point of the 4 link. Its actually 48.5 on my car. The 7 means inches above the...
Our car is tireshaking on the hit. 3000lbs tubechassis with 2000hp blown alky and glide.The car gets up on the wheelie bars for about 10ft but the...
Its a big chief motor using a fresh supermag 4. We are running in the mid 7's at 3100lbs. 4.90's eighth. thanks Mike
We run a 540 KB Olds hi-helix blown that uses 32 deg timing for a kill tuneup. We backed it down to 24deg due to chassis problems. Now we're...
Josh, I talked to you a little at WIR about your troubles. I still blame the unilite. Another site that might help you out is HRE.com....
My current IC is 48.5 7 inches up. I'm going to try lowering it a little,maybe a little longer. I'm sending my shocks out for inspection. They're...
By violent I mean hard on the wheelie bars and the rearend is seperating from the chassis. I launched at 3000 rpm once and it instantly hit the...
Looking for a baseline instant center setting on a 3020lb blown alky powerglide car. 52% weight is on the front tires and the crank centerline is...
