Separate names with a comma.
We run a wetsump BBC pretty hard with a 14-71 kobelco. Made lots of good laps at 34psi and 8800rpm. At the last race 1/8th mile we sped the blower...
Jesel and T&D stands are mild steel. Quest racing quoted me $500-600 to make tool steel exhaust stands. The later Jesel stand comes with a long...
40 runs on Brooks B2 8800 rpm shift. They were cracked around the bolts but still holding torque.
We ran 18deg Dart water castings dry and torched/cracked every exhaust port at less than 30 psi boost soft tuneups. The matl was less than .100...
Pete, I think you might be on to something. We have had flakey issues with the switch when we are logging sometimes. After a run just watching...
we ran 14 and 18 deg darts with no big hp difference. I think the runner volume is around 400cc stock. I know one of the Dukes is a virtual twin...
I was told Chiefs are 150hp gain on a 2000hp combo. We made the switch and had all the aforementioned valvetrain issues plus broken water...
I don't have any experience with dragsters but taking timing out on the hit is the only way to go fast with a blown doorcar and a...
We always check the transbrake and datalogger between runs and everything is happy. ..then no data down the track. At our last race we ran 3...
Today Edelbrock tech said the logger is not compatible with any magneto and even a MSD box can cause problems. Nothing is mentioned in the manual...
Our quickdata works when idling in the pits but does not record data from a run. Really irritating...
mains The splayed caps are a mess on a MK4 due to the panrail oil galley. You end up with minimal thread engagement and catastrophe if you thread...
We run 10.2-1 compression with 30 degrees and 40lbs of boost with a 14 deg Chief. I think it will make even more power with 32 degrees. Every fast...
34 degrees with a conventional big chamber and 32 with a smaller big chief style is what Oddy recommends for max timing. We ran 30 with a 14&18...
We run a Big Chief Chevy with 14-71 superman HH@ 34% od. We recently started breaking belts (14mm) at several different places on the track. The...
timing You didn't mention a timing control but if you don't have one it will probably do a lot more than tires. We run a roots/wedge/glide promod...
I need a new 4.25 crank for a blown BBC application. Everyone in the country seems to have at least 10wks lead time for a custom. I'm leaning...
Edelbrock We have an Edelbrock that has been failing to record runs. It seemed ok until we turned up the mag and boost...hmmm????
wish I could..Oddy doesnt give out the card. I do have a hurt cam that somebody could put a cam Dr. on...
We run a 540 KB/Olds with 14 degree chiefs and a 14-71 k9 Superman. With 375lbs spring pressure we broke an exhaust rocker stand in two and all...
