Separate names with a comma.
You Pprobably Need To Put A Roller In It With Heavy Pushrods. We Ran 7/16 .080 With Our Chevy Stuff. With That High Static And Just That Little...
Batteries Ok Tried 3 Lawn And Garden 12 Volt 200 Cca, Wired At 36 Volts, Fresh Stripped Littlefield(probably Too Tight) And A Fresh 572 Would Not...
Acd Makes A Good Actuator, We Have Used Those And Are Tyring The Two Step Now.the Air Actuator Is Good For Making The Throttle Speed Opening...
Ok We Got 3 Lawn And Garden Variety Try It This Weekend See What It Does
Whars The Easy (cheap) Battery Pack For An Rcd Blower Mount Starter? Will It Work On 24 Volts Or Needs More? Anyone Using A Small Import Car...
Lencodrive Maybe Its Just Me, But Seems Like People Have To Work On The Lencodrive A Lot More Than A Bruno Unit. We Were Running Super Chevy This...
Leak Down Some Guages Read Backwards Depending On The Gauge The Snap On Unit Reads Correct, 78 Would Be Showing
Mike Dunn 940-240-1603 Makes A Top Quality Piece
Master That Should Be Chassis Shop.com
Master Cnc Makes A Nice Aluminum Master, With Two Outlets Check Chassis Sop.com
Does Les Have A Site With His Products, Or Anyone Have A Number?
Big Chiefs I'd Estimate 2300 Is Possible, We Always Double Heli Coil The Exhaust Rockers Hole
Block As Far As Quality The Gm Cnc Bowtie Is The Nicest Probably A Few Dollars More Though
4 Link Good Starting Point From 6.5 To 7.5 High And 45-48 Out Lower The Ic More Violent The Transfer 10 In Crank Cl Is Ok
Line
Air A 5 Lb Cylinder Will Last Many Many Passes, About The Same As A Air Shifter I Suppose, Cylinder Is Approx 1.5 Diameter, About 14 Inches...
Launchers Go With The Air.. Pretty Compact Except For The Length Of The Cylinders They Will Throw Them Chutes Out There Quick!
Question For Jr Jr Do You Sell The Aluminum Fuel Line Tubing Like You'd Run From The Tank To Pump Inlet? Bent At 90 Degrees?
Mats How Thick Are Those Mats? Kinda Look Like A Tarp From The Pictures..how Do They Hold Up?
Any Runs? Lonnie Have You Run The Car Yet With The Psi? What Clutch/transmision Ratio.rearend Ratio You Going To Try? Any Other Changes From The...
