Separate names with a comma.
dribble most ADRL automatic cars run the single port nozzle. I'm setup that way but no hits yet. Gorr will tell you it's your choice.
tank We've always run fabricated tanks of "bare" and clad aluminum. We'll leave it in at a 2 day race.I ran a tank for 5 years made from .040....
Looking for a reference. Thanks, Mike
bbc Obviously you've done some work on this thing. I don't know anything about pulling except it's brutal. We ran a similiar combo years ago with...
lenco one of them uses a ford FMX clutch. I have a old CS1 and a late Cs1 and CS2. The old trans has smaller diameter clutches.
bbc If you're buying new stuff and not worried about the budget only invest in a hemi as the chevy's are almost worthless. We have a big chief...
deck Go with 10.2 or 10.7 max. The rod length doesn't mean much with a blower. Belts are easier with 10.2 and it's lighter.10.7 is a common KB...
plate It's called a flexplate for a reason and billet 4130 is a flywheel. Coan says aluminum absorbs some of the loading that the rear main will...
We have a 2650lb promod with a screwblown automatic. Will a small pinion gear set live at ?. we'd like to get some hits before we commit to a 10...
mag It's outrageously expensive but I finally found a place that seemed to make sense. I think it's M&b metals out of canada. They were cool on...
n20 Several ADRL pX teams use it with screw blowers. Most are very secretive but one I know used two dry nozzles in the back of the hat. I was...
plate sold thanks ITA
plate My superman used a 2.5 inch setback to clear the intake opening on a chevy. It was the same plate from regular retro blower.
redline x2 on redline
B2 The V2 is forged in the same foundry as the Brooks and the Venolia rod is a good piece so I don't think it's risky. They ran out of forgings...
brooks After almost a 4 week wait Venolia tells me they ran out of forgings. BME quoted me 1520.00. The only other option I know is Hussey.
plate I have one for a superman. approx 2 inch setback. 100.00 Mike 316-259-3883
3.81 After some clarification i'd say that 3.81 might be a hot dog wrapper. I was there when Thomas went a low .80 and he had a lot more blower...
roots Talked to a guy with a KB olds lencodrive out of Louisiana that went 3.81@185 at 2600lbs with a mert 16-71 and very high overdrive.Says it...
pulleys I'm in the same boat with my Chevy. 24 inch between pulleys. What is your deck ht? I've seen a spacer under the blower on 481x before....
