Separate names with a comma.
I'd say your doing it right. Does Miersh do this for a living or whats his story?
First get the map right and if its still diluting then lean the BV.
Alky in oil To make a long story short I've fought this also. Lean your barrel valve.
I've never been in a good situation to test this question but here is my thoughts. If you take your short stroke combination and simply change...
We run restrictors even though not many recommend in our situation. I would like to take them out for more pushrod, rocker etc oiling, but I have...
I have similiar problems on my BBC's, similiar cid, similiar psi but tractor pulling. I've tried several things. Dykes rings, hellfire rings...
Kaboom Here's an approximately 5000 HP inline 6 cylinder, 3 turbo's, alky. This is one of the best, of course not at there best moment here. I...
I would love to be able to return no fuel when the motor spins to fast via the overboost signal. But it scares me, won't it hydraulic:confused:
My 2 cents The one procharger setup that I know of in tractorpulling runs about 40 psi boost and fights temp. problems. I don't know the exact...
Does the "fuel enrichener" protect against high RPM in driveline failures or more intended for a loss of traction scenario?
Aftering seeing the Over Boost activated fuel rev limiter on RBS's website it got me thinking. Several times I've broke valvetrain and my boost...
Is this clutch dyno a common thing? What data is typically gathered?
If you guys are doing it them it must be cost effective to fix them??? What is a ballpark cost for fixing a crack?
Yep, the first time it pushed the wire out but not the 2nd time. The wire is in the block and in this motor there is no recieving groove. The...
We melted head material in #2 cyl., warped the valves bad, pushed the hd gasket out and pushed the o-ring wire out of the block deck. I just...
I go 500 feet per MP size change.
"the fuel to the ports should be increased" then later "I'm running 70/30 hat/ports" So your running more fuel above the blower,...
Without supporting data I beleive the old guys that the old blowers were best run in the 30's. We ran our 80's vintage LF 8's at 45% but I have...
1.56 overdrive times an Engine RPM of 9000 is 14,000 rotor RPM. Were these cars running 9000 engine RPM?
Remember that the amount of fuel going thru the blower also changes the boost and temperature reading.
