Separate names with a comma.
WOW!! Does that ever paint a mental image! It would be quite something for electrical wigdets, the large HP e-motor and the VFD or whatever they...
Brian, what kind and size of blower?
For most purposes, yes, right by the pump. I got my fitting from Good Vibrations, in the catalog its called a "Fuel Pressure take Off Adapter"....
Couldn't agree more with what's been said above! Sitko/thjts Thanks Guys:D Will, sometime I need help posting a jpg or pdf. I can't seem to...
Veney had mentioned the casting people struggling in this area on his earlier hats. Something about a dip:confused: Maybe this could become a...
Jeff Fagala Hi Jeff Thanks for correcting me, I also hope I didn’t come across wrong. As everyone can see I should have confirmed with the...
Jessie We run SSI 8's. At this point I don't plan on putting this coating on. Good luck at NFMS. Craig
I used to polish until they were a mirror also, for heat reflection reasons. But then I realized I wasn't helping to keep the fuel atomized so I...
We've run against a fair amount of Jeff Fagala and Dennis Piranio's work. They build good stuff, they are hard to beat. We know Brian Nelson (this...
Mike, do you mean the F6? http://www.jdfperformance.com/F6_Completed_ReadyForShipping.jpg
I agree with Mike fully. We've had interesting conversations about this stuff before, a search should reveal more info.
I understand what you're saying but my understanding is we're talking a psi reading in general in the hat, not localized areas. I would love to...
I think Craig Moss is assuming that if the hat is in a vacuum (under full throttle), then that means it is a restriction to the blower. I would...
Are the hemi's setup where the cyl. sleeve actually sticks up above the deck surface a tiny amount? Almost like a fire ring on a diesel.
I assume your talking to me and I've run 0 endplay with the same results. The only thing I have thought of and haven't tried is getting an...
After asking, SSI sent me drawings showing these dimensions.
Ditto!, except the spark scatter. I can't say that we have scatter, but I have something like 15° of retard at idle. I can't seem to get rid of...
I've always wanted to data collect with a vac sensor in the hat also. Veney told me with a HH 14, switching from a plain jane birdcatcher to...
It's common for the Chevy guys to put the wire in the cast iron block. Some people have problems with receiver grooves in the alum. head. The...
We use Clark's .041 wire, which is in a .039 wide groove and about .025 deep. So I have .016 sticking out. Groove diameters: We've had grooves...
