Separate names with a comma.
My understanding is that the starter motor/planetary/drive dog assembly is the same regardless if crank or blower starting. So I think with...
I've never tried it, but theroetically I believe yes you can push it in far enough to "drive". In tractor pulling we push the pedal in to start...
Thanks Bottlefed, yes that's what I meant.
Sean, that is the way I do it also except I like to have the piston stopped down lower in the hole, about 30-40 degrees on the crank. (it is a...
My stuff is BBC's. I've heli-coiled older Mark IV blocks in the dowel stud hole. I made a simple drilling fixture to ensure straightness and...
Oh, I never thought of using copper that way. Garlock 2400 is a material I've seen on other intakes. I personally have never used it but it was...
I'm not sure why you would want to have copper intake gaskets, but if you send Clark Copper Head Gaskets a normal fiber one, he will make some for...
Maybe Jeff Fagala (Murphy area, http://www.jdfperformance.com/index.html) or Billy Loftice (Dallas area, Loftice Enterprises) could help? Also,...
I've successfully used clear vinyl hose in some applications. One I know for sure has been 6 years and I just changed it, for no reason other than...
Ours is BBC, no water in a water jacketed cast alum head. We drilled/tapped a hole parallel to the deck surfaces, centered front to back and just...
Anybody have any experience with using a input shaft brass bushing vs ball bearing? This is a BBC with a 3 disc Crowerglide.
Our motors are BBC, but some have Chevy crank flanges and some have 426 hemi flanges (8x-1/2" bolts). With 3 motors on the tractor, sometimes...
On our BBC's... Once upon a time I found that one of our lifters didn't have all the oiling holes drilled, I had already ran it and didn't have...
Ours are BBC's. Wire is in the block deck surface, no sleeves in our stuff. Ø4.800 on center, they basically touch inbetween the cylinders....
I thought most modern day hemi's were leaving the sleeve stick up above the block deck slightly. This would do a similiar thing as the diesel fire...
I've never had experience with anything but Mallory mags,,, but Dean Stumme in New Hampton, IA runs a turboed BBC I beleive in the 50 psi range...
ø1/8" If its "1/8" o-ring be careful, there is some o-ring material a little larger than .125, like .139.
Szabo Bob Szabo's books are filled with equations and helpful info. http://racecarbook.com/
high speed camera Any body ever mess around with high speed cameras that are focused in on the face of the tire?
Please elaborate, which drives?
