Separate names with a comma.
I would reccomend the Dart 360's also. They are a good head and now there are many quality used ones out there. The last set I sold for $1900 cash...
Don't get nervous over the thickness, it still works just fine.
Whats the grease for?
Could it be setup for an aluminum piece to be bolted to the block. This would be the piece that holds the foam which acts as the seal to the intake?
Gary Sellin (417) 777-2332 When Bigfoot raced, he was there last engine builder. Tell him Hi and that Craig Ulmer gave the number.
Is the angle used to get the mag/distributor away from the cylinder head/valve cover? Is there a little universal joint in there?
We used to run 540cid, ported Dart 360's, HH retro 14 @ 45% over with about 7000RPM and would make about 38 psi. The cam was similiar, although I...
Oh, I had normal BBC stuck in my head.
Promod83 Like Mike said 062-081 thick and make the other adj. as needed (pushrods, etc) Do you have inside head bolts? What heads are you...
Altronics PerformAIRE
Dave Junk is a stronger term than I needed to use. We've run for years and years without filters and near zero problems. I took a shutoff...
Certainly detonation will blow anything out... I run o-rings and most of my stuff does not have recieving grooves. When I ran 14's and high...
We're ordering some today. Gonna put them inbetween the -8 check valve of the port distribution block and the hose. I'm just trying to catch junk...
3-D I run extremely close motors to what you described. I use the same plug, yes -9's. I plan to try some -10's later this season. My...
Valvesprings Double check your valve springs. A couple years ago I changed blowers. I checked the valve springs, they were good. I made 1...
Long time ago we ran BBC 540's, 10.5:1, large rect. port Chevy heads with std helix LF 8's at 45% over. We would run about 6500-7000 RPM and make...
I've always wondered, how did that slot ever get started. What's its history? Who was the first to put it in?
Promod, I would talk with a different person at Brooks.
I think the screw arrangement can be added??? It makes me cringe thinking about slamming it in. I've done it accidently a few times:(
Ronny Evidently yours does not have a knob at the tail end of the starter which screws the drive dogs together? That way they don't slam into...
