Separate names with a comma.
No, they are not all the same..... Each manufacturer will usually have a reference dimension from the front driver's side mounting stud back...
Thanks. Looks like I can save just under 4 inches.......
Can someone please measure their PSI funny car injector (the metal F/C injector from PSI) and tell me how tall it is from the base to the top?...
Finally. Some new ideas :). I will predict that A/PM will not be as quick/fast as PM for quite some time to come.....
The explanation is pretty simple, sort of.... A Roots supercharger is an air "mover". When the lobes rotate, a volume enters the cavities and...
Nitrohaulic, is that a 10.7 block?........
Lonnie, what's the 4-link centerline of that axle? What condition and # of runs? MW's brackets or brackets as per some other builder?
A quick question if I may...... A friend is contemplating 50% nitro for his Promod for ADRL next year. His current deal is a Promod legal...
Based on my experience, you are better to call them in person. They offer great service & support once you connect directly. E-mail has not been...
Screw blown alky...... What diameter and brand of pin seems to work best? The bigger Stewarts? How about hard anodizing the ring lands?...
SoDak, what hardware do you already have and what exactly are you trying to accomplish with the fuel system as a whole? Is this twins compounded...
Interesting topic AFC357....... I have an engine from a dragster application that needs to now go into a door car. Was zoomies (2.5"x20")...
A question for people running beadlocks and 36/34.5 tires....... Is there a rough rule of thumb for the % slip or spin that you aim for when...
Dave, this is his site http://racecarparts.com/ ..........
Is the new coating a better fire retardant?.....
Check ebaymotors and racingjunk. There is one new second hand CN block and at least one solid Donovan HC700 block right now........
Let's say that a person was going to order a couple of new cranks, plus a couple of new spares, for a screw blown alky type setup (4 cranks in...
What are some of the common setups for blown AFC these days, in terms of bore & stroke & deck? What RPM's are people turning them to? Is it...
Two questions please...... Ron C. what is a "napier" second ring? Would it be at all beneficial to measure and record the blowby during each...
I am curious as to what the reason was that caused people switched to 3" mains for a period of time? Why I ask is because one of my motor...
