Separate names with a comma.
Dry Sumps and blowers Why don't more people run dry sumps with blown motors?
Yes, the black strips need to be cut, but you need a damn good lathe to cut them straight. You are cutting them so there is a clearance and its a...
Build/buy yourself a rotor fixture. Put your rotor in it. Get a vise grip and lots of WD-40. Take your time and you won't ruin the rotors, your...
Last spring we bought our 2nd Ohio billet crank. We've run Crower, BRC and there was one more but I can't quite remember the name. We have...
We have 5 sets of the Isky Redzone lifters and have had zero problems with them. alky blown BBC
Most all of my stuff is o-ringed. Do you other o-ringers put a dab of silicone at the o-ring splice like me?
Don Zig has mags for this also.
Do these sleeves typically have a flat spot where they are closest to the ajoining cylinder? Approximately what is the OD of the sleeve?...
Do these contraptions only control the throttle blade opening? Is there any feedback from anything? When it is used like a 2 step... Does the...
Our blowers were brand new from LF with 6-32 in them. I specifically remember this because some holes had the threads stripped and had nuts on the...
6-32 x 1/2" long is what my box says. But I have nuts on the back side (in the hallow of the rotor).
I'm curious also. In fact I've asked on here before.
I am interested to know the flow numbers also, but... The NA airspeed vs boosted airspeed has to be different, given the same port. And so I have...
Do you reuse them?
Have you experienced the ignition timing retarding at idle with your front mag drive? If so, what cured it?
Thanks Guys! Typically how many total events are available to go to, money, miles and time aside?
I think it depends on the combustion chamber shape also; conventional chevy, hemi, 12° chevy, etc.
Can someone explain how the divisional end of season points system works? We have too many events spread across too many miles. We don't want...
The NA alky I've helped with is 16:1, it's for pulling.
To do the leakdown you need the orifice inbetween the 2 gages.
