Separate names with a comma.
Can you buy broken sets? Like if I'd buy just #5.
What are you going to set the endgap at?
My latest stuff is also Blown BBC, Arias, Hellfire and cast, I do whatever they rec'd. If you want I can look up what those numbers are.
Don't know how true, but I've been told that they will outperform a fully ported Dart 360. Wheatman is on this forum and he used to have some....
Harry, I've grown up with BBC caps fretting. I should be able to minimize it for you. What heads, ignition type and timing, block, fuel, etc. do...
Yes, its linear. You're examples are correct.
600-(600/216x215)=2.77 but technically you don't need to show the parentheses or just do it the easy way, 600/216=2.77 :)
Causes of detonation and preignition; too lean, too much timing advance, sharp edges in combustion chamber including piston dome, hot intake temps...
I guess I do things the hard way:o
Take the weight you want to move, subtract it by itself, divide by the axle to axle dimension in inches and multiply by one inch less than that....
I've posted this before... But if you're on a showstring budget I would reccomend recording RPM, Fuel PSI and EGT. If you only can afford 1 EGT...
Another option would be to take off the BDS and put on an Indy manifold. They make one that will make your port nozzles pretty equal but without a...
ETC makes a limiter for the Vertex.
This is the way I do it also.
I relate the setback to a front discharge blower vs the high helix (although the high helix may require a little more setback)
I just reread your post, sounds like you are using the original blower and is that the slower blower speed. At least on the turboed allisons,...
Wayne Longnecker (515) 367-4184 could speak intelligently to fueling an allison. He has built many allisons for his own pulling tractors and...
To be technically correct you should use solid core wires,,, but many people successfully use resistance wires. If you have a data collector you...
runner lengths How important do you think runner length is for a roots blown setup?
Please send pics of your intake :)
