Separate names with a comma.
I have the habit of dumping both, just in case one does'nt work, you never know. My car run's 182 in the 1/8 and 225 in the 1/4. If one does not...
I went from dart 360 heads on a 565 injected motor to Big Dukes on a 632 injected motor and as I recall I used a little less fuel with the big...
Stroud chutes Buy yourself two Stroud chutes, no relation, you will need the pro stock chutes. They are designed to be used together, using two...
Will 481x heads fit a new century chevy block?
JB Weld works great alum. to steel, smart ass!@! HaHaHa
No shit!! I was kidding about the welding, it seemed funny when I typed it,sorry.With the green loctite a dab will do you. And even then you may...
After you tighten the bolts, weld the heads to the flywheel. Presto!! No more loose bolts! Or try the green locktite, it is listed as a sleve...
Man I hate to admit it, but I spent a couple of hours making a little bracket to mount a spring on. It works great though you have to hold it...
Frank, I broke about 4 powerglides before we figured it out. Wish I could have saved you some of the destruction. Jody Stroud
Frank, I use the Dedenbear model that is air on and air off, most models use a spring to close. Make sure you cycle the trans brake button in...
two step Dude, I just went through this shit on my dragster. Yes you can two step it but you still need the air throttle to only open the blades...
Anyone have any info on 11 deg. or 12 deg heads with a blower? How does the blower like the small chambers? How does the heads compare with 18...
Thanks Andy, I've talked to Eddie. He likes the Bruno better also. Don't think I'll need to leave past 5500rpm's so that should not be a problem....
What is the diff. between a Lenco drive and a Bruno with a lenco back half. Any thoughts on which is the most reliable and simple to operate in a...
Call Randy at RPM , for the money it"s the best data logger out there. Easy to istall and just as easy to use 1000's less than race pac. Tried an...
Also, if you are using the rpm selector that is the msd dial type,ex. 8000 to 8800 in 200 rpm steps, you cannot make the connector wire longer by...
I have to admit Bob, that is one thing that never occured to me . The blower only has appox. 14 to 15 runs on it. Could the strips still be...
Thats sort of the problem, I reused a set of plugs from the last race because at that race they never got hot or a full pull on them. Hated to...
Yeah, I also use anti-sieze on my plugs. The motor was fresh it was the second pass on the rebuild. Haven't checked leakdown. Spike with Gorr Fuel...
Mike, thanks for the reply. No I didn't clean them with brakecleaner, and I forgot to mention that since this was a division race I was running...
