Separate names with a comma.
Have you ever used a Kinsler high speed adjustable bypass like this http://www.southwestracingspecialties.com/product.cfm?invKey=21707 on your...
Here's a K style plumbing diagram. http://www.goodvibesracing.com/Technical/injector_instructions_BAWNBV.pdf
FYI, I don't run a TA/FC, just blown alky tractor pulling. We run our return lines back to the inlet of the pump with a fitting like whats on...
Marty We've never ran'm. But if we ever go to 4 motors my first choice would be KB Olds. Could probably do a search on here for "Olds". They...
I voted than wondered if you only want Brooks rods owners to vote? Our Howards are forged with the ditch in them.
So does it not expand as much? Whats bad about moisture in the normal air?
Does the hub fit tight on the crank snout? Does the hub have a hairline crack in it?
Is the 481x a head bolt pattern all of its own or does it match something else?
I would just like to comment that I've never been pleased with my repeatability of using a leakdown to set BV's. I still do it to get into the...
I would also check ignition timing and if the blower belt is too loose.
If you currently do some fabrication in your shop, you can probably build your rotor holding fixture along with the gear pullers. Buy some...
Don't you have a way to adjust the port alignment? like intake gasket thickness
I'm not a hemi guy, but I think you're going to find that you'll need .055-.060 clearance. You could use a thicker head gasket.
I would give that port nozzle more fuel.
If you give all the orifice sizes, one of us could get you close.
Whatever route you take I would suggest this advice: Make sure the deck surface finish of the block and heads are correct for the gasket you...
Curious why you're puting it up there, won't you have 8 more lines to disconnect everytime the blower comes off?
please, me too:D
"I have used M-5 at the track and on the dyno. And to be perfectly honest, I hated it. The plugs are VERY hard to read and tune, with all of the...
Here's one this should help http://www.insidetopalcohol.com/showthread.php?t=29410 There are more, I geuss you'll have to scroll through...
