Separate names with a comma.
I did talk to Kinlser and they wanted me to buy the K-140 at about $450. I can never tell if I need it or I'm getting salesmaned:eek: That's...
I'm not familiar with that small of OD and that tall of installed height. Any local machine shop should be able to set you up. Otherwise PM me and...
I would like to have the dimensions for the hemi bellhousing pattern and crank flange if anyone has that please PM me. I have the BBC if you...
What kind of max psi do you guys run while using this regulator?
mag? MSD 44 or other?
When I ran too lean and too much ignition timing, I too had loose timing cover and pan bolts. I would loc-tite and have lock washers in my timing...
I've been happy with Nextek springs. We're on about our 7th set. I could help you more with installed height, seat psi and such, if need be. What...
Thanks :)
Yes, except not a hydraulic steel fitting, but an aluminum anodized one from someone like XRP.
I'm looking for how long a 1/4 NPT to AN 6 female fitting is. I'm hoping it is about 1.5". Any fitting dimensions that you know of posted on...
My starter is in the driveline, but,,, I would like to get setup so that I can borrow a blower starter as a backup plan;) I have the SSI blower...
I have not noticed this "lapping", but I usually run MPR air filters.
I'd definitely get a different blower.
I'm curious to know what kind of combination you have that's making 3500 HP?
Mike I'm surprised to see you write, "I believe that one pound of boost is equal to 150-170 HP and I might be a little conservative in my...
Go Chevy! Ouch, this thread sure is hard on chevy:eek: Sorry, I had to say something:)
3 possibilities that get tried in my shop: 1-left hand drill bit 2-use extract a screw set 3-place a 3/8 nut centered over broken leftovers and...
Can you share?
Does the Prism Gel increase HP along with maintaining those higher HP numbers for more runs? hope that made sense.
Couldn't have said it better myself:)
