Separate names with a comma.
I have experimented with pressure film. Although its neat, I didn't see anything different than what the lapping marks already showed me. The key...
http://www.sassyengines.com/featuredpart.html We made our own plates. One was from 3/4 and the other 1" thick alum plates, than we have the...
At what max engine RPM? We used to run 68%, now we run 43% (because of rules) and our blowers spin faster now than when we had the fast overdriven...
On these all out roots blown alky motors, I'm assuming 2800-3000 HP is there peak HP figures. At about what RPM is this, 9000? What kind of HP...
I put my hands on one of our SM IV's this weekend after a 12 second pull, it was not even warm.
I have never noticed our SM IV's getting hot, but can't say that I've paid attention, especially after we went to setting the timing with a buzz...
Could use one of these http://www.goodvibesracing.com/Pump_Inlet_Fittings.htm with a 90° hyd hose end on the end of your hose. I've done this for...
Personally I consider SSI, PSI, DMPE and Littlefield as the top four with fifth a long ways back, this is just my opinion.
http://www.stainlessheaders.com/index.aspx told me that most mandrel bends out there are overseas steel and American made mandrel bent tubes will...
We've had problems with our mallory turning and it ended being the offset wasn't machined quite right.
They vary too much to get you closer than what you probably already are. Flow the #45 Enderle and drill it out to get 47%
There are a lot of blown alky tractor pullers using it.
Our stuff is for tractor pulling and not all my parts are crower brand, but they are slipper clutches. We like to balance the flywheel on the...
Sounds like you need to get your Hilborn hooked up to your leakdown and see what it leaks. Than hookup a Enderle thats almost up to the Hilborn...
I'm surprised you get away with that much cylinder psi and a 7al:confused:
I would expect the boost numbers to change if the cam was in different. Are the spark plugs the same part number (as last year) and is the gap...
I know they are on your list but the first two things to pop into mind are that a high speed isn't opening (maybe in backawards) or some...
I thought a button was a button also. Had some Venolia buttons and ordered new Arias pistons (same CH, pin size and ring package) but I had to...
Yes the F rotors are larger. I assumed SSI bored his cases.
Call SSI and ask how much more air you will get from that F2. It is way way better than the B. This will help you figure how much more HP you'll...
