Separate names with a comma.
Gary Sellin (417) 777-2332 Bolivar, MO Gary has an inertia dyno very similiar to Fred's and was BigFoot's engine builder tuner. or call...
It depends on what you're looking for... 1-if you want to correlate real life nozzle psi so you can plug this into a math formula than you'll...
Ours is also a Pioneer/Dave Archer front drive. We just use a stock distributor drive that already has the tach drive built into it.
A friend of ours built these I think he started by stealing stock tach drive parts and machined them to attach to the cogged pulley shaft that is...
On our BBC's we attach to the bottom side of the offset mag drive directly below the mag. On our front mag drive it uses a stock distributor...
I am looking for a way to disconnect the positive and negative of the battery at the same time. Does anyone know of a way to do this?
I was specifically referring to the compatibilty to the "noisy" Mallory mags.
I see quite a few guys doing this with MSD 44's but is anyone doing it succesfully with Mallorys? Also, do they have playback?
Search this forum for other posts.
If I understand you correctly, you changed nothing and the boost increased from 20 to 24 psi. If this is the case than you have an intake valve...
Here's similiar example: When the Dart Big M heads came out they "outflowed" the 360's "by a mile". Well, I don't recall the cfm numbers, but...
Yes you are thinking correctly, more fuel or less blower. Personally for us less blower is not an option:D Side note: If they still have the...
My stuff is for tractorpulling and its BBC, HH8's making 1600-1700 HP. I try and keep mine lean so the oil doesn't get so much alky in it. We are...
I have found this to be the quickest also. Of course you're checking it after everythings tight to make sure its what you want.
burnt on oil on chrome zoomies Does this Autosol also take burnt oil off of chrome zoomies?
A kickout on a deep skirt block "really made a difference" Are you talking HP difference or a oil control difference?
You'll have to be more specific.
start by turning up the idle RPM a little, see if that does it
http://www.goodvibesracing.com/technical.htm Here are several applicable topics for ya.
Yes, You are correct in your thinking.
