Separate names with a comma.
I went 3.95 in the 1/8 and 6.13 in the 1/4 with Camerons transmission. If you live anywhere near Columbia S.C. you can't go wrong.
Price seems right....but not to keen on mag. blower cases. They are light but not as strong as alum.
Heard today that after this year the IHRA will be gone, anyone else heard this?
What a tool.....bet he wears fake Rollex watches and fake gold.... asshole.:p
Had the same issue with my blown bbc. Turns out it seems to have been a combp of a cam retarded too much and weak valve springs (not enough seat...
You can get it so over center on the rich side that the egt's keep going up the fatter you make it. It's because it is still burning fuel as the...
If you have a high eff. washer... wash with cold water on hand wash with a dash of detergent. Have always cleaned my stuff this way. It's no worse...
All of the big gasket makers do, call one. Sorry thought you wanted head gaskets.
I looked it up with Mcmaster Carr catalog, I think I'll try neoprene... compresses well and does'nt take a set and is rated "good" for akly,...
I run a 10 Plus on a big chief chevy blower motor. We run a PSI 14/71 at 26% OD makes 35 lbs of boost... no problems. HOWEVER I run the ten plus...
Watch a top fuel car bury the rims at the hit,:eek: although it's with beadlocks. The same tire with beadlocks will wrinkle less due to the better...
Casey, I doubt it will have any effect, it's only 1/2in. per side. As thick as the sidewalls are it won't move in much.
Me too Fordster, 4th batt. 325 AIR 82nd ABN. 1986-1990, 1991-1991. Operation Just cause 1989.
My engine guru is going to check it from head to toe, thanks for the tips.
My head guy is going to repair and make the heads stronger, also cut down the exhaust valve a little for more room between the two. Guage is...
Went from 62 lbs to appox 90 lbs of cranking compression, helped... but did not fix. Took motor down, found that the new heads had broke through...
I fianally talked to Gorr the other day, motor only had 62psi cranking compression (I hope due to the cam being so retarded ) I'm going to set it...
Glad it worked for you:)
Mike the rpms were acting crazy so I just threw something at it to see what it did. I'll move the pickup back to appox. .050 out. Thanks for all...
