Separate names with a comma.
Needs at least a one inch vent or if possible the same size vent as the fuel outlet.
4.10 rear with a 34.5 works real well, my hemi runs 235 plus with a 1.65 low gear powerglide at about 9000 rpm through the traps. Hope this helps.
My MBR Hemi with a mag 44 starts fine at 25 deg timing, crank trigger only, with a Rock 16 volt. I use the mezerie starter and 139 tooth flywheel.
I run a three step but don't usually hit it. I control my revs with my foot, the three step is there just in case I get over excited.
I also cut the rear off my INDY intake and welded a plate on the rear so I could fit a crab cap MSD dist. without an offset drive. Worked great,...
When I ran a chevy it did the same thing on a rebuild. Ended up taking the motor apart and rebuilding it from scratch. Only had about 60 lbs of...
RIP the EXCAVATOR, godspeed Neal.
Need to see if did this right.... set motor(on compression stroke) to top dead center, then went to 25 deg advance (MBR motor). Set mag in and...
Derale (I think ) AN 8 fittings are best with the fan mounted to the cooler.
Less power with the zoomies and weird sounding.
I also have a 565 ci chevy with dart 360 heads ( fully ported ) injected on alky using a sheetmetal intake and a bird catcher. I have run 4.66 in...
No problems .... yet. A friend of mine told me how to do it. Arron Sipple at Iron Man race cars. Seems to work fine.
If you are using a six shooter, when you kill power to the six shooter it will kil the engine..... however if you run a capicitor as...
Has anyone had any experience with a B and J convertor drive and their two speed, rather than the more common bruno's and lencodrives?
just be ready for a dry one.... without the common courtsey of a reach around,........ in Drill Sgt. lingo :)
DO NOT !!!! Get Will started on that s%@t again:D Some love it some hate it with a passion and say it blows up motors at the drop of a hat. I...
Same here I run Stroud chutes (easy to pack) (he did work for the military), diaper, blower bag,and seat belts (six point type). I've always been...
Granted for a TAD or AFC racer a trailer mounted awning is better, but at over three times the cost it had better be:eek: If you stay at the track...
EZ-UP Pro Series, all aulm. const. Light 10ft X 20FT you can move where you need it and it sets up in less than 5 min......can do by yourself......
Sorry, I didn't read your post right. If you are on the "brake" and it rotates I don't have a clue..... but as Brandon said you can hold it with...
