Separate names with a comma.
My uneducated observation is as follows. On the back of a PSI is a label with a formula for CI X OD% / # of Cylinders or something to that...
Contact your local Commercial Vehicle office and pick up a FREE copy of the Federal Highway Administrations Rules and Guidelines for Commercial...
After reading a few of your posts I gather that you are from California where DOT laws are stricter. In most other states as long as you do not...
CDL is a short abbreviation for Commercial Drivers License meaning you need ton to drive a commercial vehicle above the gross weight of 26000 lbs.
Get your self a copy of the FHWA guidelines from your State Highway Administration Office and also get a copy of the Haz Mat rules and Guidelines...
Did they realize that bleach did not help or was there progress made in tire compound?
What was the purpose of using bleach? How was it replaced?
You are only required to log in a commercial vehicle, not a registered motor home or even a semi that is used for personal entertainment. And as...
Try Kenny Knowling @ Knowling Motorsports Management. I apologize, I lost his cell number but if you go to www.outlawpromods.com there is a link...
I think you can get most any ratio for a 2 speed. Call Dave at Lenco and he will head you in the right direction.
We ran 46 and 6 with Santuff Shocks and very rarely hit the tires hard, if anything it was a little soft on the tire.
We have always ran the Castrol 4 cycle 70 wt and have never had any problems. The stuff is really hard to break down.
Wouldnt it be a whole lot easier to just get a degree wheel?
I just learned that my plate was supposed to be modified for port nozzles which it is not, the coil is new as well as the msd and I only too the...
Bought the blower used, but from someone I know, the blower lifted on the last pass it made prior to me getting it. It was running consistently...
The barell valve has been altered per PSI's diagram and is at 76%. The 30lb nozzles on the hat were via them but I see what you are saying, at...
I have a a 526 hemi with a 206D and am experiencing something that I was told should not happen with my settings. I am getting cylinder temps in...
