Separate names with a comma.
What type of ignition are you running?
I'm hearing from a few sources that if you are running a BigM Chevy block with the Titan/Moroso pro billet wet sump pumps that its a good idea to...
Bearings x2 on King Have never used anything but King bearings. Everything comes apart in perfect condition. Corey
BBC Offset Drive I use a Sitko drive, its one of the best I have seen, a lot of good features. (oversized pump drive hex, cam hub has twice the...
Pushrods What kind of boost were you planning on running? Corey
Pushrod lenghts x2 on rething the 3/8" I was thinking a lot smaller as well untill I called Terry. He set me up with 7/16 x 1/2" taper .188 wall...
Pushrod lenght Still best to check them using and adjustable lenght checker. If you get the wrong lenght you'll just start tearing stuff up. Corey
BBC Helped I opted for the smaller bore on my deal (4.500 540) for the fact that if you loose a piston or something there is lots of meat left...
Oil Problems We're also going to put a drain line from the back of both heads into the pan to get more oil back from the rocker boxes. You might...
Push rod lenghts I just got finished checking my engine for pushrod lenghts, x3 on Manton. Received the pushrods today, beautiful stuff. Get the...
Will it start Gottcha, too bad. Damn class rules. Try and stay away from the mini starters with the the ratio's in the 4:1 reduction. They will...
Will it start I just talked to a buddy of mine about the same thing and he asked me "why are you carring the batteries on board?" I couldn't...
Water Manifold I see, so you will have to drive it beyond the bleach box and track, fair enough. Corey
Water Manifold Just wondering why you are using water in a blown alcohol car? They run nice and cool just dry. Unless you are hot lapping the...
Intake Broke through I have been hearing from various people that I should remove the epoxy and run it as is or sleeve the hole. I am now leaning...
Intake port hole Decided to just put a bit of JB over the hole, I greased up a stud to use as a backer and it seems to be pretty good, the port...
I just finished setting the heads on my engine (BB chevy) and one of the head studs tore a small hole (1/4" long x about 1/8" ) in the intake...
Rod Bolts What series of rod bolts were they? ARP2000, L-19 ? Thanks
RPM Creep I don't use a pneumatic launch control but I deal with hydraulics and pneumatics in my job, if your cylinder is extending causing your...
Head Flow I will say about the RFD Dart 360's. I had them build me a set and the "claim" is accurate. Mine flow around 450CFM I haven't run them...
