Separate names with a comma.
Bearing Measure Not sure what your trying to accomplish. Little more info needed. Corey
Track Problems Had another look at the video, it looks like your rear spring rates are a little to high as well, what are they? Plus the car...
Track Problems I would baseline the rear shocks by backing off the compression all the way (soft) and crank the extension all the way up (stiff)...
Piston Pins Don't use taper wall run straight wall. Core
Rear seal I rotate the real seal on all by BBC engines, no alot just about 3/4" off the parting line. I still put a dab of sealant on as well. I...
Battery The 6 volt and 12 volt would give you the 18volts, but I don't think you would gain much from that arragment because 6 volt batts are not...
This is only if you plan on taking batteries down the track with the car. I think Mac is considering the sdame thing I am, loosing the batts from...
Starter Issues I've had this conversation with a number of people regarding the longevity of a 12 volt starter if you are hitting it with 24...
Battery Issues You are doing the same conversion I plan to do this winter, I was just going to hit the starter with 24 volts and be done with it....
Gear Ratios I'm thinking off starting with a 2.04 first and a 1.44 second with a 4.30 rear gear. Am I at least close with this combo or way off?...
I need some info about what ratio's I should be using in my Lenco 3 spd and rear end. I searched the entire site but there are not any threads...
Oil Heater We used to use the pad style but could never get them to stay where you put them. Switched to the Moroso element style heater and...
Indy Manifold OK looks like I'll go that route as well. Thanks Corey
Indy manifold Mac, you mean just in the back of one of the runners? Thanks Corey
I remember a few guys on here saying they were using the Indy blower manifolds on Chevy engines. I just picked up one and my question is, where...
Lenco It sounds to me like the reverse slider may have broken some teeth off. I am a fan of Lencos but the reverse sliders I am not a fan of,...
CS1 Reverse What part of the planet set came apart. Did the planet pins fall out, carrier fail? etc Each result has a slightly different cause....
Supercharger I am just wondering why would you need such a large and efficient blower design for a "street car" who are guys racing and how fast...
Restrictors Thanks for the advice, I'll make sure I put them in before final assembly. Corey
Oil Restrictors I had a look at the block this morning and if I decided to use restrictors (leaning that way) using a drilled cap plug looks like...
