Separate names with a comma.
Mag It really depends on your budget, in my opinion there isn't a blown bigblock Chevy that "really needs" a Promag44. A Promag20 yes, and they...
Rear Springs If you don"t have access to as set of wheel scales, I agree with Mike, 150Lbs is pretty common. Corey
You should try some of the new ARP Custom Age 625+ bolts, they are as strong as the L-19's but without the embrittlement issues. Problem is they...
Spring Clearance The way I do it is with installed height, minus net valve lift gives you clearance. I use .060" as a min. Anything less and...
Gear Drive The RCD drive is about 100.00 bucks more but they do have a billet front cover, if you want the nice shiney stuff the RCD is the...
Gear Drive This topic has been talked about alot here but, I have a Milodon gear drive, its really the only one I have ever had so I can't...
Lenco You shouldn't need an adapter, just remove the middle section and attach the reverser to the 1st section. The adapter plate is sandwiched...
Shocks I'm going to switch to Afco shocks, went to the Dave Morgan seminar when it came through, he had a bunch of them and they look real nice....
Ya, I'm new to Jetsize and tuning with a logger so I think I'm going to bite it and let Les and Shaun point me in the right direction. I'm into...
Fuel System All the answers here more or less say that yes it can be done only with data from the car but its a good idea to get it flowed. I...
Fuel System Thats what I was hoping, over winter I plan to outfit the car with all the equipment listed in my initial question. I have a...
If a person has a flow meter and fuel pressure sensors on a data logger, plus Davenports jetsize software is it absolutly essential to get the...
Gear Drive I don't know if its the best but I use the Milodon gear drive. I've used it on 3 engines, just keep taking it off and putting it on...
Hey Ken: Curious to find out how you discovered the slippage in the sprags? We they coming out blue or scored? Corey
We use regular 10-30 oil, that info comes right from Lenco. Clutches always look like new. Corey
Engine Storage I have the same problem you do, my engine is complete but the car is not. I'm just going to wait untill the car is ready and then...
Timing Start from scratch and find TDC manually(pull #1 plug etc) and see if your balancer mark is where its supposted to be. If it is then set...
Keys To tell you the truth I was only looking at the hub keys, didn't look that closely at the inboard key for the geardrive gear. Im going to be...
Crank Oddly enough I was looking at my crank key ways last night and, yes you can see the bottom of the old woodruff keyway in the new 1/4"...
4-Link software We use the Performance Trends 4-Link calculator plus. Works great, fairly easy to use. Plus it has simulations to let you see...
