Separate names with a comma.
Did you have any luck/interest selling the big chief ? I'm considering building a spare. Your stuff is probably too nice as i'm looking to go...
Chevy If a BBC gets outrun it's not because of airflow..it's because the valvetrain blew up. You have enough pieces to make a lot of power with...
mag mallory uses the stupid little red plastic adapter 2 pin thingy. I have a similar animal on my tractor. I'm sure Mallory copied it.
Bill Doucet of louisiana had the cam ground. He has a lot of big chief experience. Look him up on here.
bbc if you have a good blower and fuel system it will be fast. Don't abuse it in the waterbox. Apparently,the chiefs get pissed when run without...
bbc I ran 30 total with a roots. I think 32 is about max. Be prepared to dump half your timing on the hit...it will be violent.
Bbc We've picked up about 1000hp since this thread started..lol. Same 540 14 degree with a psi D screw now. The exhaust is the weak link. Run a...
Chevy's pump a lot of oil to the top. Without restrictors you'll have broken rods and burned bearings.
mag probably won't pickup much with a mag. I'd get a 12 with the big cap. We went from a supermag 4 all the way to a 44 promag and never really...
v According to Jim Oddy "H" is for horse$hit and "V" is for victory...LOL. M is for evaluating a tuneup and must come out every couple of...
edelbrock it's junk for a blown car. There are plenty of posts about it. If you want value get a RPM logger.
Do you know how loose the lifter bores were? We run a Chevy with offset lifters and the bores are getting scary. It's working good now but they...
It's held on with a huge snap ring. The cylinder has a snap ring at each end.
valves I traded a new one to JR at RBS blowers.
2 step Brandon, it sounds like your blades/barrel valve must be closed more than mine since your gpm is that low without a leanout. I've got...
We have a chevy with a D rotor psi @100% and automatic. Launching with 4100rpm on the 2 step and blades set to 23psi the car intermittently drops...
gear It will go fast with a 1.77. I'd try it.
#2 Get a PSI screw and number 2 will be the fattest in the engine. I think it's the intake and the way the air discharges from the roots. I think...
bolts For the rocker bolts We use a 12pt head ARP high $$$ bolt. You can get them from nascar teams all day long on ebay cheap. We have hundreds...
tuneup 34 degrees timing MAX with a supermag. Probably a little less with a promag 44. EGTS can run over 1200 depending on the setup. The best...
