Separate names with a comma.
-12 I wouldn't do it. -12 is way more restrictive. Lowes has superlight dirt cheap black flex hose for sump pumps. It's not very robust so you...
Supposed to keep fuel pump happy and help with corrosion effects of alky. I've never had a fuel pump wear out since using it.
tank I build mine out of 6061 bare and clad aluminum and I've never anodized or had a corrosion problem. We drain after every race and run...
reactor poor design and service to match. Call them and ask about service. We broke a ring gear tooth within 10 starts. I have two for chevy...
bbc we ran Brooks B2 and venolia in a 10.2 rodeck with 4.25 stroke. The block will be lighter when you're done! A lot of notching on the bottom...
crank pretty common...I was told Bryant was the only mfg that could hit a date and it was 12 weeks.
Mike we use the R5671-10 mostly and the 6010-10 when we are really leaning on the tuneup. I was told those two plugs are about 1gpm difference....
brt Bruno will walk you through the overhaul. It's easy. The mods are only needed for the 1.25 input shaft. Wolfe racecraft and Grant Macrary do...
rings we've run regular and .017 dykes always with standard second. We have the most runs with .017 dykes and have never had a problem. I think...
manton Manton, whatever they say for the retainer and keeper. You'll be happy.
Is Mike Dunn that builds mag drives out of business? The number I have is disconnected. thanks ITA
Unfortunately,the titan pump demands a hex driveshaft with a special 125.00 hex distributor gear. I don't mind changing it along with rods or...
I'm running a BBC promag 44 and titan pump with a Dunn offfset drive. I was assured this setup would not overload the bronze gear by several...
cam Bill Doucet, DMPE or Oddys will make you a lot of power.
crank Theoretically the grain structure of the forged crank should be stronger. My billet Bryant seems to make bearings look better almost like...
pretty much what i've found...they don't gain much strength over a chief and I don't need anymore flow. I found a couple longblocks used but...
Anybody have experience with Profiler or Raptor 12 degree heads for a max effort screwblown app? I talked to Reher Morrison and they said the...
The rules should make decent parity to start. The outlaw roots and low OD screws are a little bit unknown on performance. I know Gaylen runs lower...
blower The C,D are really hard to tell apart so there will never be a rule giving the D a break. We looked at some of that TX racing and...
roots our 540 big chief made about 42psi@8800 with a modified superman kobelco and 43%OD. I'm guessing it was making 2400hp. If you need more...
