Separate names with a comma.
should i use flat washer between bolt head and flex plate?also flat washer on nut side?what would be toruq on these?7/16 nf grade 8
have a PTC converter i had pad spacers welded on at PTC..they sent me 6 bolts and 3 nuts..my converter has 3 pads that is thearded and 3 that is...
what's brand of polish and where can i get it...lots of polish aluminum on my altered and need something good i don't need to spend week doing it..
i got myself a block mounted idle pulley bracket.removing blower mounted bracket..due to my front mounted mag drive[bbc summer bros drive]not able...
have a drama here..installed trans and converter and measured my clearance[with converter push all way into pump]between it and...
Hi BIG B;;;you put the hemi in your falcon?this is Don[that was building the 63 nova 2 door seden delivery...traded it off..building my myself a...
have a fuel altered i'm building..will be installing trans tomorrow..don't want to install verter dry;;my combo;;; 540 blown alcohol injected...
Dave...thats fine..i'll be at a car show fri and sat myself..i'll won't start building bracket till sunday or monday..forgot about car show had to...
that will be great..thanks Dave for the help;
Dave;;;;cell no#775=340-5505 Thanks
anyone running a B&U enderle hat[tall] that can goive me a measurement of there cable bracket from where it bolts to hat to bottom of it? i'm...
Darren;;;;won't ask ..where should i put it?hope to never need it but if i do then be nice to have..plain on shutting down with fuel shut-off..i...
so i need to remove the ground strap up front[goes from head to block]from block and go to mag base instead then? how about the rest way i'm...
Running a Mallory SuperMag111..i have ground strap from one head to other head[aluminum heads//cast dart block]on rear and on front running ground...
9" Yukon Aluminum Thru-Bolt Case ;;;any good?what kind of hp can they handle in a altered with floater axles and pg auto trans w/PTC 10" BLOWER...
ok;;;spent 2 hours today in home depot trying to find right amount of thick washers[grade 8]to use fot spacers..wasn't able to get even close..is...
just checked my clearance between converter and flex plate..with converter all way back into trans;;have .470 this means i need to use .345 spacer...
THANKS EVERYONE;;sounds like i'm going with block starter..Darren..i have a bb chevy so it will be a snap to go block starter on it..also only...
going to need to buy a starter coming up..bbc/12-71 blower/alcohol/22% O.D.;;; what's things i need to look for when buying? been on line and...
i need to buy my own idle pulley bracket..i borrowered a friends pulley bracket that bolts to blower front cover..need to return his and buy...
