Separate names with a comma.
Do you put magnets in your parts washer? Have you ever heard any reason not to do this?
What boost numbers are you guys running? Also, are you running them pretty lean?
We've been using Mr Gasket #121 and #122, really have no complaints other than it seems like we should be able to take the intake off without...
Hey, if you get this to work, please let me know. Otherwise for about $350 you can buy a ETC rev limiter with switch (to activate shift light)...
Thanks for your real life input, I was wondering how many FPS I would be happy with when it came to slow motion while at what resolution 1080, 960...
Do you use either one of these? http://replayxd.com/replay-xd1080-camera/...
I'm not aware of how to make the MSD 8950 & 8737 work with a Mallory SM II or that anyone else is making a similiar setup work.
AJPE makes a billet head. Here are some other ideas: -how about cutting out the aluminum until all the "soft" is gone? than weld bar stock...
There is a way to make the PSI go up with the same pump but keep the volume the same. I've done it several times, but I use my fuel flow bench to...
I hear ya and we've only ever purchased used ones. Saw one advertised as cast mag and it got me thinking as I will not run cast aluminum pulleys...
For chevy, try this http://www.summitracing.com/parts/MOR-62388 or its little brother http://www.summitracing.com/parts/MOR-62390
Were there cast mag and billet mag pulleys built over the years?
No, I wouldn't try running it without having your system on a flowbench or I'd sell the new 600 or return it to whoever you bought it from in...
No, as far as I know the housing needs to be machined deeper to accept the wider "gears". Does this engine have a blower? If its NA the 600 is...
We spin 1500 more RPM with a bigger crank than that on 2.375 journals and have no bearing speed issues. With such a little stroke you have...
Please rewrite your question, its not clear what you are asking. With a 2.25" setback, the adaptor plate opening hole must be open where the...
How much power or how fast are you trying to go?
Unfortunately I don't have any clearance numbers for you, I would think a automotive machine shop would know this.
Isky redzone have been good for us, I think we have about 6 or 7 sets now and have only recked any when the lifter bore gets wore out or the...
Never heard of them. Are they for a particular head or what is curtisbilt trying to do better?
