Separate names with a comma.
Will send later tonight....... Thanks.
Waterman Little Bertha (red). 27.15 gpm @ 4000 shaft speed. Steel liner. 3/8" hex. 1.5" inlet. Dash-12 outlet. Distribution blocks on both...
Have a brand new 27 gpm with shutoff if that would work. whome@look.ca or 905-644-1948
Agree 100%......
You could try here ..... http://www.itwswitches.com/Mil_Aero.shtml#
Okay, I'm still not getting it. Maybe you can clue me in offline?....
Wouldn't the periphery speed be higher for a bigger diameter wheel at the same RPM?.....
What about a larger diameter trigger wheel?....
Have to order some pumps in the next little bit. How does Waterman stack up against Rage? Thanks.
, Yup, never run a competition (drag) EFI motor with self learn capability in a short duration competition. Use it with limited authority as...
Interesting. I would like to know more about what you use, and whether you use a top lube in it. Either online or offline at whome@look.ca . Thanks.
For those of you with EFI meth systems (or MFI) what exactly are you doing in terms of purging your fuel systems for storage between usages? I'm...
Technically that is a "Coil Near Plug" (CNP) setup. "Coil On Plug" (COP) would be coil right on the plug with no wire in between. If you make...
What sort of RPM's did you turn?
So basically it is all to do with the torsional repeated wind/unwind of the crank snout inside the hub bore (due to inevitable key play) and the...
Dumb question...... What actually causes crank hub galling and metal transfer? Is it because the hub is trying to wobble up and down on the nose...
Rear flange crank pulley or mid flange crank pulley? What are you torqueing the bolt to? Seems kind of an odd occurrence if you have a crank...
What's an F6 injector?........
How do things look around the small end rod/pin joint?
Two questions...... Do people ever EDM a small passage through the rod beam from the big end of the rod to the small end of the rod, to pressure...
