Separate names with a comma.
Get rid of the MSD 10. I also had a BBC 588 with a 1471 hi-helix. When I went from 18lbs to 30lbs of boost I started putting holes out....
Do yourself a favor and part that stuff out and buy the Sitko drive. I have a BBC 1471 and bought the Pioneer and Keith Black set up. It was...
I am getting ready to run a new rotating assembly in my BBC 1471 hi helix 29% over Dart headed 555ci altered with a p/g. Before I was at zero deck...
Ran 6.78 at 197 with an eagle 4340 4.50 stroke crank. Prior to going blown it was in a 950 hp injected motor and had 100 + runs. Bearings always...
Can we get a picture please? I'm having a hard time visualizing the tape on the shut off, thanks.
Any chance you have the fuel filter cartlidge up side down? Don't ask :rolleyes: Do you have an on-board primer? When we were injected we had...
Well yes it does I suppose :rolleyes:. The crap cap sets very low, in fact lower than the top of the intake runner on the head. So unless you...
Holy crap that looks identical to what I just had happen to me. In our case we had broken the tranny the run before and skyed the motor. The...
Just went 6.78 with 588 BBC 1471 hi helix with 110 (12.6 at 4,000) with 80 pill and no hi-speed. Car was very fat after 6500rpm. Tune up was way safe
Yes you can! My car (1471 2 INCH SET BACK) was setup with a msd distributer and crab cap. The cap is lower in height than the top of the...
I vote for the Sitko front mount mag drive for chevy. I needed one in a hurry and George custom made it for me and had it in my hands within 72...
I have a blown alcohol altered 1500-1600 hp with double wall funny car zoomies. Just picked up a DL 32 data logger. Now I need to decide if I...
Looking to purchase 12-20 crew shirts and some sweatshirts where can I get a good deal?
After a protracted build up I finally got my car to the track today. I posted here for advice before; funny car 588ci 1471 blower p/g. @ 12% over...
Well I not in the market for 2000hp unless of couse JapTin is making 1950hp:p I'm having the fuel system done by a local (well known) tuning...
Man you are talking way out of my range. We are looking for 1400-1500 hp:) I was hoping we could get close to 1300 starting out at 15lbs of...
One and a half (very long) years after switching to a Blown Alcohol Funnycar from an injected door car we had igintion today (lift off coming...
I had 565 BBC with hat, same compression and same heads. I ran a Ron's #1 pump 38 nozzles, 98-104 pill at 28-32% leakage. Was not close to being...
Thanks Jap Tin for the offer, you're such a giver :rolleyes: . The rods and crank were run with these bearings already and that's what the...
Just getting ready to fire up blown alcohol engine 588ci BBC 1471 hi helix. The bearings had six runs on them when we decided to switch from...
