Separate names with a comma.
Do you have the MSD 10 or 10 Plus, there different. Blessings........Ron.
Don:), today they will tell you to design your ring package, put the pin where it needs to be, then measure from the pin to the crank throw and...
Tired of seeing your fast Dragster-Funny car-Altered-ProMod sit there? Ready to have some fun? Gather it all up and meet us at Sacramento Raceway...
How can you improve on that! If you chased everything that you hear, you wouldn't have time to race. Blessings...........Ron Clevenger.
Congratulations to the Ahten family on there 5.270 #1 Q today. Hopefully they will go rounds to the final. Hard working family that does a lot on...
I think you best answer is going to come from this contact. Alan Johnson AJPE 1-800-922-1202 Blessings........Ron Clevenger.
Like Maximus said, it advances the cam. Where your combination will work best depends on a number of factors. First off make sure you have...
I've used one like this for years on my blown BBC at 16v. Not one problem. These small starters come out of the import motors, make sure you get...
MGP will provide that service. Blessings.......Ron.
This shop is in the NE, seem to have a good reputation http://www.cncblocksnortheast.com/ I don't know if they can help but they do pretty...
Do you run a vacuum pump on the motor? Blessings.........Ron.
Need a race fix, we've got just the thing for you. 6.30 Index heads up starting line 4tenths tree, any type of race car (dragster, funny car,...
Sorry for not following through sooner, been busy in shop and also wanted to talk with a friend of mine who has a Race chassis/fabrication to...
I recently ran into this on a nostalgia blown nitro engine. They had 8 degrees advance on the cam. Made no sense to me to move all that torque...
Paul, most dragsters on this board (exclude bracket rear suspended) don't run any drive shafts with U/J's. Just use a male to female coupler from...
I think the question is targeted to a 289" wheel base dragster. No 4 link, shocks, spring rates or universal joints. So it might be a bit...
4.60 is a good place to stop. If you need any bore clean-ups just hone a couple thousands and order pistons to size. The file fit rings for a...
Joe, the damage sounds like valve train out of control due to insuffient spring pressure. If dad was doing it before and it worked, that sounds...
I think your just going to have to experiment as to what works best for your combination. Most likely you'll find that bringing in more timing...
What kind of ignition? Blessings.........Ron Clevenger.
