Separate names with a comma.
There's definitely a difference and I think it has more of an effect in TAD vs TAFC because of boost. I think you can go one step or so back...
The most important line I have ever been told in tuning converters was told to me by Brandon Booher when talking about tightening a converter....
If I'm not mistaken, Brandon Pesz was the quickest blown car in Denver at the World Series deal. They recently switched to Fuel Tech with the FT...
Every unit out there has it's pro's and cons. The command module is pretty much purpose built for this type of racing and does not need much...
Individual Cylinder Timing is the biggest reason I stick with the Grid system.
If you can swing it, get everything. It's one thing if the car just dies, or won't start. It's pretty elementary at that point - you change...
Ohio area has quite a bit of a heads up scene for dragsters and the like. Different rules, but we don't have anything down here for "outlaw"...
It may have been a production problem, but I had a customer buy a bunch of the proflex hose and every -6 fitting leaked like a irrigation system....
I obviously won't have dates until NHRA posts the divisional schedule, but I have a verbal agreement in place to try to do 3 races at Evadale...
Here's what you need to measure - Front opening of intake to centerline second blower stud (these are the only ones that line up). Front opening...
I changed my FC from a Chrisman to a Strange Top Loader. I sent him my old plates and he was able to make new plates based off the old plates -...
Call Greg Miner at M7 Performance. He can take your old plates and convert them to whatever rear end you are wanting to change to. 209-329-7570
have you tried running it on the mag trigger through the grid?
Lee Callaway misc driveline parts 4.29 10" US Gear, good used - $400 4.10 10" US Gear, 1 run, - $700 Diest CS-2 3 speed bag - $100 ea - 2 avail...
Lee Callaway clutch grinder sale Paton style grinder. I'm not sure if this was built by Paton, but it is a horizontal magnet table, stone...
Lee Callaway clutch parts sale Selling Lee Callaway's TAD clutch parts as a package deal. The clutch out of the car is a low run 10" All...
Lee Callaway Fuel System & Blower parts sale Complete fuel system off Lee Callaway's TAD - set up for PSI D rotor at 127 over (60 lbs of boost)....
Lee Callaway BAE/TFX parts sale SCE Head gasket 4.467 .080 (for TFX/BAE TA-1) - NEW - $140 set SCE Head gasket 4.500 .080 - NEW - $140 set SCE...
Parting out Lee Callaway TAD operation. 288" Uyehara chassis that was front and back halved by Chuck Haase' in 2012. Approximately 97 runs since...
Old trick learned from Gary Phillips - put your pyro's in boiling water, should read 212....
