Separate names with a comma.
I run .020
Wet sump with 13 qts, car only runs 1/8th mile.
I have a buddy with a blwn alky car and his oil pressure gets down to as low as 25 lbs near the end of a run, it has plenty of oil in it and the...
I have Strange single piston front calipers and Strange dual calipers in the rear. I also have a Strange Master Cylinder that is mounted beside...
Do you know if this one will work in an application other than 4x4?
Does anyone know of a website that allows you to enter 4 link dimensions to obtain intersect and height? I know there is one but my browser...
I use STP engine treatment, never burnt a pushrod and it is cheap.
I see there being leverage applied to the bearings in the snout withthe pulley on backwards. Leverage = Stress. IMO
Ask someone else about the restrictors other than TFX, it still sounds like it is pumping too fast to the top. 15 qts should get it throught the...
I agree with this idea, it will save both money and headaches.
The main thing with Hemi push rods is proper lubrication prior to starting the engine, hell I even oil them before turning it over to set the...
Almost all blwn alky cars run a single plus setup with a 44.
I think maybe you need oil restrictors, I have ran 16 in the quarter previously and never lost pressure.
1/8th mile only, F/C pan, 3.75" front and 5.75" rear. Screw Blown BAE 9800 RPM with a P & P Pump. Wet Sump
All head manufacturers use a different pattern for exhaust. However you may be able to just change the flange and keep the same zoomies.
I dont see how, the liner wheel has 2 tubes, one against the sidewall and one against the tread. If you have the tubes then you might as well run...
The problem is you cannot go by how they look. I ran a set of Brooks 88 on a door car once for 41 laps, on #42 a rod broke and all the rest looked...
Yes but they are very unpredictable on a door car Sean, almost down right dangerous.
Noone ever replied to this, anyone know of anyone running his heads or know anything about them?
BAE 5 heads will work better in a PSI application from what I have been told.
