Separate names with a comma.
This was my thinking as well but how does the smaller exhaust valve help with lower blower od? Also, I think the intake valve size was increased....
What was the reasoning behind making the exhaust valve smaller in the BAE 6 head? Any ideas?
Dont defeat the purpose of putting a lower rear gear by putting in a longer first gear in the tranny. By doing this you will only gain gear ratio...
Blowvette dont wast time or money on exhaust gaskets. There is no horsepower lost from not having them, you will not burn your head and you will...
Again I ask why even run a gasket? What does it matter if it leaks a little?
Why even run a gasket? If the flange leaks a little its no big deal. Save the time and money, take them out.
You need the 1.80 and the 4.56 gear if not even a 4.71. That will help alot. What engine is it that you are shifting that low?
Any reccomendations in nozzle sizes for 8 intake and 2 hat nozzles in a Veney headed hemi, 206D blower, 526ci, 19 gallon waterman? I dont know...
Definatey a valve not seating properly for one reason or the other.
?????????????????????
Price Went Up :D:D:D Try Castrol 4cycle 70wt
Crane R296/500 R16 is a good all around camshaft for an alcohol engine.
Not misunderstood, I meant to type wet sump...lol. I will start all over. Why will 17 qts not work with a wet sump in a PSI application?
Please explain a little more about why 17 qts wont work in a dry sump with a PSI.
This is exactley what we have done as well and if you mount the Ford type solenoid really close to the batteries you will never have to worry...
24 volts will not hurt your starter as long as your solenoid only gets 12 volts.
BAE Heads and Block although Chuck Nuyyten makes a nice hemi block.
2 inches will only be enough to make it far enough down track to find out you need another two inches.
I have never seen an alcohol car at 36 degrees. A Veney headed engine up to 31 and a BAE headed engine up to 27 is as far as I have seen them go,...
How do the evacs drain on this setup? It appears there is a small valve below the evac hose but I dont see a vent.
