Separate names with a comma.
I read somewhere once that top fuel engines actually ran the cranks partially submerged in oil to help quell some of the harmonics inside the...
Yeah it was probably empty LOL
I did the same thing in 1999 when I built my first injected big block. LOL. But if the pump is cam shaft driven it may be a lot higher than the...
8 to 10 min.???? Sounds like you ran it out of fuel, injected cars use a ton of fuel warming up. Check the fuel tank ....... I'd bet its empty or...
You will find some good answers on here....... But there is no shortage of shithouse scientists on here with differing points of view, me...
I agree with mike that a straight fitting will in some cases flow more than a drilled 90 deg fitting. But that will not cha he the fact that there...
That's what mike at rage said also Bill ,,as long as port nozzles are kept below 85 he never saw a diff in flow. He has run 90 deg fittings on...
Mike with rage fuel systems changed my straight hoses to 90 deg nozzles when he re- flowed my system. On his flow bench it showed no diff in...
I was there, lost first round to eventual winner Eddie C. Mellisa Hutson was number one qual. She won first round but hurt her car doing it. Phil...
Maybe. But how high Are you turning the engine?
Talked to a friend and he said that those old fuel heads were bad about clipping the valves together at high rpms in a blown alcohol deal. On a...
That's when mine went pop also. I think you are lean. It gets worse the farther you go down the track. Always around the 1000 ft mark for me....
Probably lean..... I once had an open -6 check with no pill in it at all ( I screwed up ) and the car ran like a raped ape during the day, air was...
Should be square to car. But you can call mike and ask him
I have a toggle switch in my cockpit that I hit after I prestage. Catches the boost and egts while on the two step. Shows the whole run with no...
I agree with Brandon. Just put an inline filer with a stainless element and be done with it. I went with the seven inch long system one and have...
Just balance the pressure everything else will work itself out .
ok here'es the deal....it could be a number of things but the first ones to check are.... is the motor spinning fast enough? Has to be over 250...
The Protopoutlaw's first race of the year will be may 26 2013 at Dorchester Dragway in Dorchester SC. Heads up dragsters, altereds,and some...
One tire being in the sun will only increase the pressure Unless you put more air into the tire manually the volume can not increase.
