Separate names with a comma.
550hp or so
I run 8mm stuff on my BBC on have had zero problems. I run used 8mm/1600/75 belts that I buy off a local TAFC/TAD racer that puts a new one on...
I'm going to run GRP rods, I've had good luck with them. As for the cam I was going to talk to Billy @ Oddy's and maybe buy one of there grinds?
Good points. It has .904 lifters,Manton 1/2" to 7/16" taper wall push rods.straight wall pins with buttons. I will have to get some more info on...
I'm going to run my Mert 14-71(K8 rotors) blower and Davenport fuel system off my current BBC.Its a cast iron block,470ci,360 heads, made 1600hp...
I'm looking to buy a BBC off a buddy of mine but I'm not sure if its the way to go or not. Everything only has 40 passes on it with a stack...
If I was you.... I'd send your fuel system down to Davenport have it flowed and go pick it up when it's done and Les or Shaun will walk you...
When I ran a blown SBC I used to have water in the heads only and it was a pain in the ass and didn't seem to help anyways.We had trouble with...
Talk to the cam builder and get his choice then pass that info to Manley and get a set of there Nextek springs. But there's not point ordering...
I think it would be a good idea if you could do both.What license do you have currently?
You would need carbon fiber brakes and emergency shut off system also to run TAD
I don't have the block I'm looking to buy one, I'm just trying to get some more info on them before I do.
I have a line on a very nice KB600 with no windows or saddles. Can you run a conventional 168 tooth BBC starter?
The KB 500 has standard caps. KB 600 has cross bolted caps
Anyone run a KB 600 aluminum BBC block? Good block? How does is compare to a Donovan or New Century?
I wish that CSR starter would fit I would order one. I'll try hitting mine with 24v to see what is does. I wonder how much better a 16v would be...
I do pre heat my oil. I have a Moroso heater on it
I run a high torque mini starter on my car but it doesn't have quite enough when the motor is cold. It says it's a 4.41:1 reduction but no motor...
Talk to Butch on here.He runs a BBC with a screw with lots of sucess
Yes the back of the driver's side runner
