Separate names with a comma.
Who do you suggest for getting a block welded back together?? thanks!
Anybody heard anything? Rumor - NHRA is looking at a new class in Comp for Blown Dragsters only! A place for fast Top Dragsters that want to go...
Blown KB - what is the recommended clearance and how far can you go prior to bore job and new pistons? Have not checked what it is, just taking...
Where is the best place to pick up fuel pressure & what is a good pressure to shoot for? Don't have flow meter, have roughly a 55 - 45 split...
A few weeks ago some posts talked about timing on different combo's. Someone indicated that when using fuel heads on blown alcohol you need more...
Downloaded the data, but had spikes and not all channels recorded. Shifted by the light, but the RPM data recorded wasn't even close. The only...
Every thing seems to work reasonable well up until about 600' and then it is just lazy? 1.0's @60' 4.27' @ 660' but only 6.80's @ 1320' - 1900#...
What are acceptable numbers for a blown hemi, if you do a leak down? Has anyone pulled the heads and leaked just the chamber to see what the vales...
Which manufacturer of valve spring is recommended on a blown hemi? Any input would be appreciated.-- Thanks!
What is the recommended spring pressure (closed) for blown hemi, 32psi boost? Feed back would be appreciated - Thanks
If you use a set of fuel headers on a alcohol motor, how far off will the temp readings be due to the fuel probe location being so far away from...
Nice article about the club and track at Great Bend, Ks. Nice to see someone acknowledge SRCA, the track and the hard working people that make it...
Where do you get replacement gear for the Mag - Oil pump drive shaft?? The gear is has a pin thru the shaft & has two allen heads that hold the...
Putting together a blown KB to run top dragster. Which oil is recommended? Feed back from experienced blown alcohol racers would be appreciated.
Would like some input from people with experience. What do you recommend for fuel distribution between the hat and intake percentage wise? Going...
Any idea how to contact Davenport? I have called 403-938-6200 seveal times only to listen to a machine. Does anyone else sell a tuning software...
