Separate names with a comma.
I run an 11" crowerglide behind a 392 Nitro Donovan in a Nostalgia Top Fuel FED. How important is clutch balance? should the clutch assembly be...
Which is better and why? clutch floater plates with no grooves?, 1 groove?, 2 grooves or 3?
Looking for a data logger for 8 x EGT's only. dont need RPM or any other channels. what is the best value data logger for EGT's only? Thanks Dave
What is the best/maximum amount of mag advance on a Nitro Donovan? 417 block at 392". Mastodon heads. Billet crank. 92% nitro. 8/71 standard...
Looking for a new 10" centrifugal clutch and wondering which one is best? East West? Crower? Bonifante? Molinari? other? Thanks.
Using a Gates 1568 x 14M blower belt on a 6 second dragster. How often should I replace the belt? how many runs?... only 15% overdrive on an 8/71...
On a Donovan 417 block there is a port at the front right side of motor that connects to the main oil gallery. I have seen some racers feed oil...
Looking for a new roller cam for my Nitro 392 Donovan Hemi. Can anyone either recommend the best cam specs? or anyone got a cam for sale? 392...
What is the ideal cylinder head temperature prior to making a run? what temp for making best power? Temp probe is in the back of the cyl head....
I have a 3 plate x 11" Crowerglide clutch on the back of my Nitro 392 Hemi. Im thinking about modifying it to make it into a 2 disc clutch....
How much weight should I have on my clutch? 3 plate 11" Crowerglide, small stand, 6 lever. my combo... Front engine nostalgia fuel dragster...
When adjusting a glide clutch between rounds, is it better to set the air gap by adjusting all the stands to exactly the same height, or is it...
What is the best surface roughness for a new set of freshly ground floaters? how coarse or smooth should I grind the plates? is it better to have...
Im setting up a 392 Donovan Hemi, to run 90% Nitro. Port nozzles are #85 to #92. I currently have #3 teflon & steel braid hoses with 90 degree...
Im seeking opinions on whether or not this diff combo is suitable for my application. Donovan 392 nostalgia fuel motor in a 180" FED. Only race 3...
Looking at buying some new wheels for a N/TF front engine dragster. I want to use the M&H or Hoosier 16 x 12" NTF slicks....they spec 10" wheel...
Im looking for an alloy 9" diff center to replace a nodular iron unit. would appreciate any advise or recomendations on which units are best? or...
Can anyone recommend a good engine out distance? From Axle centerline to rear motor plate for a Front Engine Dragster? Chassis is 180". Nitro...
Does anyone have a drawing, or dimensions for the bell housing bolt and engine dowel locations on Donovan 417 Hemi or a 392 Hemi? Need to make a...
Does anyone have an email address or contact details for Gary Burgin Enterprises? need to talk with them about Donovan 417 info. Cheers Dave
