Separate names with a comma.
Frank, Took a look at your web site. Nice site, neat tractor. Learned something today. I never would have believed that lighter was an issue on...
I think some of you are making more out of this than need be. The K valve or any of the improved clones isn't the cork for most folks since they...
This is the one I have. 714-972-8006 Hope he didn't finally get ticked off and quit. Makes neat stuff. Dave Koehler...
Gives you .090. Have seen "sloppier" used with no issue. How would you make it tighter without a new crank or custom rods? I think I would run...
Only 3 grams? While not perfection it is unlikely that it would have caused an issue. You didn't mean 3 oz/in did you? NOW that's a problem....
From a crank balancing stand point that would have been a desperation move. Aluminum would have a real small effect that close to center. If I...
What is the specific gravity of M5 @ 60° ?
Better add in butterfly stop adjustment here also. IF you adjust the BF/BV reset the stop on the other side. IF you don't the BFs will flex and...
OK, here is a thought. Make your own killer starter with not a lot of effort. Friend of mine with a blown small block made one back before all...
24 volts for sure. I just use the little chevy mini starter. My own tests show that it actually runs cooler spinning faster. Who knew? Haven't...
I would say that you got a very good set. An awful lot that come through here are not so wonderful weight wise. Most of the time you can only rub...
OR it touched after the rod got super sloppy. Dave Koehler http://www.koehlerinjection.com
I don't think you can afford not to. Dave Koehler http://www.koehlerinjection.com
They may not have made the housing proper but they did make everything else at one time. Heck, give them a call if you are looking for a part.
This is a WAG ....but..... Summers Bros.? Looks like the flanges and axle plates are similar to one that I have. Dave Koehler...
Naturally you should check every line and hole in the injection but that doesn't sound like the problem. Distribution block isn't a problem...
Been a while since I have seen one but yes you are correct.
Yeah, I think you have the dial-a-jet in mind but that is a mechanical hand operated device. Something automated would be from Electrimotion or...
Before the Flaming River switch came out I made one up using 2 switches side be side with the shafts tied together with a bar. Worked the same...
3 motors. Daaang. I can only dream about owning 2 Well, if you are looking for a magic HP bullet, this ain't it.
