Separate names with a comma.
Some of you have been following the saga of creating the Wedge injected nitro class. I finished it and moved back to my personal favorite/quest of...
Updated. Find it here. http://www.koehlerinjection.com/tech-articles.html
Rejoice I got the 10.5 tire rule thrown out. The new tire rule is.... there is no rule. This should be entertaining in the other direction of...
RCD, Donovan or Milodon gear drives
I have done 2 or 3 sets, including my own. No big deal. IF you do see air the tube thing is a fine way to seal it up. Good luck. Heck, your...
The promoter has nixed the altered idea. His reasons were plausible from his viewpoint so that's the way it is. I tried. So...it's a small block...
Just in case this has any bearing on the issue. I know firsthand how to elongate the holes in the flexplate and rip out the bolts. Dry...
Beat this up. http://www.koehlerinjection.com/pdf/WIN_nitro_rules.pdf Added a minimum weight. This allowed me to eliminate all the worry over...
I agree that the powerglide is likely a poor choice but there are some excellent parts available out there these days. Making it all work together...
Back to the Wedge Injected Nitro class for a moment. Download the updated pdf in the first post. I think I was originally trying to please too...
Updated the pdf file in post 1. Clarified a couple of things. Took out the possibility for a person of money to load it up with titanium and...
Do you mean leakage out the return side when it should not be? none A seal kit won't fix that. I had one in here last week off of a un-maintained...
Vic, Thanks for chiming in. 1: I am working on what I was asked to define. 2: What you want is an index class. No one in their right mind would...
Hi Ron, Section 1, Line #2 perhaps? On the rear end. I suspect most would do the floater but following the Advanced ET specs covers it. Only...
I realize the following has no affect on most here but I am looking for feedback wherever I can find it. Wedge Injected Nitro Series I was asked...
Think back to a basic breather on an everyday engine (old school). It's not a straight shot out. The idea is that you make it a hard road for the...
Ok, I see the basics. It's a step flywheel so at least 2 surfaces and height must be corrected. Can it be taken apart to surface the other 2...
Dual Mass Ford. Never seen one. What is the low down on those?
Those are great machines. It's the one with the table support. Keep that oil cup filled. They are a pain to keep clean but if you modify it with...
Don't they only have a 1/4" npt hole? The ID of the fitting will tell you what size line makes sense. Bettin on 6.
