Separate names with a comma.
I run a BBC Big M block with solid Brodix BBX3 xtra heads. I like to run water in the block but not in the heads. If you have a block made to run...
So the New century block is just a copy of an KB Olds block? Or are you saying it is a copy of the aries block that was a copy of the olds block...
I was told the aries block was now the new century block.
I have been runing Bill Miller rod for 4 years and get 40+ runs before I change them, am I pushing it to long running the rods and using the wrong...
Well I was running the CV products 3/8 .080 wall and I really think they were flexing. Could I be mistaken? The seat psi on mine is 375 lbs and I...
I have a few Questions I use to run 7/16 pushrods in my big inch BBC Nitrous motors and for some reason I switched to 3/8 when I switched over...
I have ran several of the GoodGuys races and looked at that class. It is hard to slow down from 6.70's to a 7.60 (even if I was # 1 at Indy last...
I have tryed a 2, 3 and 4 in my Blown 63 Outlaw Vette, all with a lencodrive. From what I have learned is that the 3 speed witht the right ratio...
I am not burning up pack's I just checked them to see if they were worn, and they were. So I am going to replace them. Ok KJC said not to set...
bryan brown, I just wanted to confer with you and your Oklahoma Base is it at ThunderValley or Tulsa? I live in Mustang, Oklahoma I have 509...
Ok, I now have more questions Both of my packs only had 7 fibers and 9 steels. Whats up with that? I have never had a problem with shifiting. I...
I am air shifting the trans. The air gap on the pack is .110. I am going to just replace the steels and put a new pack in it just to be safe....
Mike, I think you are right. Since this post Matt a Lenoc and I have spoken and they are going to get me strighten out. The funny thing is my...
I took my Lenco Drive apart to change Low gear, it currently has a 1.75 low and I want to change it to a 1.90. I understand how all of the other...
Yes, Randy can get the same flow meters as Race Pack Call him he will set you up.
We have two units on two Blown Alky Outlaw Pro Mods and they work fine. I still have a Racepack on my car. If I was to buy a new unit I would give...
We think we have found the problem. To much air in the fuel in the return line in to the tank. We made a few changes to the return line into the...
We have also been leaning to the lean side, and we put a 120 in it to try. I am going to test Friday AM before the Clash of the Titians race in...
New 12 amp mag new wires new plugs .018 gap all wire are ran in the MSD wire guides. I have the points box grounded to the heads the heads...
Thaks Guy's I checked the blower and that is not it. I have put a new pump on it and a added a second vent to the tanks. Not that I think...
