Separate names with a comma.
We had a System 1 on our car. A fellow racer hot tipped us into using a much finer than stock filter. After the second fire up / low oil...
At 20% it didn't do much except smell like nitro at 40% it was detonating and burning the heads off in an 1/8 mile.
What kind of oil filter do you have?
I just purchased a used clutch machine. Their isn't a name on it but it looks very similar to a Ray Franks machine. I need the part the clutch...
I have to second altered boy's reply. With 20% you won't get the pop and flames your looking for. Have experience with a 20 - 40 % at 9.5:1 and...
Thanks Robert it looks like they have what I need.
With Dick Landy gone and Dick Landy Industries closed. Does anyone know where to get the small retaining rings that hold the pins in Landy rocker...
What would be the length of the exhaust push rod for a BAE fuel head on a standard deck height KB block?
972-429-3923
Add STM Awnings to your guys to look at. They do a lot of work for division 4 racers. www.stmawnings.com
I have always used Brooks rods in my blown alcohol motor. But I now find myself in possession of a new set of Venolia rods. Does anyone have any...
I understand that at the time of his passing Sr. was working out of Mineo's shop in Rockwall any chance the gigs/fixtures are still around some...
Direct drive is to hard on the parts and labor intensive for the weekend deal. A simple nitro deal is 3 disc Crowerglide, two speed trans, 85%...
You can run as much as 40% nitro with that compression and 40 pounds of boost max.
handle I have a new side door handle, free to a good home. Terry 972-977-8340
good luck I tried for a week and finally gave up.
I have rebuilt Chaparral's. I can help you on the trim, roof cap, hardware, steel side pouch's, everything but the corrugated skin. sorry Terry...
What is the torque on the 3/8" studs used to hold the rocker stands on BAE 5 fat heads? Terry 972-977-8340
I am in the market for an air operated valve spring compressor tool to be used on BAE fat heads. Suggestions on who makes a good one and where do...
Is the operating PSI the same for a Lenco CS1 as a CS2
