Separate names with a comma.
do they really have to officially "drop" BAD. It looks like it will go away on it's own, with no more AFD rules changes. It may take a longer...
Are you running an automatic? If so, you could just lean the barrel valve, then if your leaving on the converter, you're wide open, so it's...
1.64 low, 4:30 rear gear. .060-.070 gap. The clutch locked up in the middle of low, and stayed that way the whole run. The clutch is working...
Are OUTLAW Pro Mods ever built with solid suspension? Why would the suspension hurt their downtrack incrementals. I know nothing about...
I'm confident our setup is correct. We've had a roots car for 20+ years, and our crew chief is very good, and has tuned a very good TAD. He...
Crower 10.7, 2 1/2 turns. Discs aren't cut down. We're thinking about putting in 10" discs, going back to 12gr, and leaving down around 5500....
What rpm are most funny cars (with psi) launching at? We ran our car last weekend for the first time with the psi, and had trouble getting it to...
We've always used Kendall, and haven't ever had any problems that were oil related. bryan brown
Mark, You should try 11mm belts. Two years ago we ran 13.9 and 8mm, and broke the belt nearly every run. Last year we switched to 11mm, and...
TAD has not, can not, and will not be be the NHRA's Busch series. Anyone can get into a TF/FC car, if they have enough money. How many drivers...
How much more is it going to cost to consistently run a BAD in the tweties, assuming they're given 125%, and/or whatever else can be done. How...
that's what i've been thinking about doing, I just don't know if all that weight bouncing on the oil pan is very good for it? thanks bryan
I just got a chassis stabilizer from S & W. I put it under the car (afc), and realized it doesn't seem to fit correctly. The i.d. of of our...
I don't know what kind of car you have, but we tried running goodyears on beadlocks for two years, and couldn't get our afc to go more than 10 ft...
10 1/2 pounds? Is that a beadlock, or tubes and liners? That sounds high to me either way. I don't know anything about suspensions or tuning...
tires? what tire combo/ air pressure are you running? if you video your runs you'll see that the first move of the wheelie bar is straight down,...
Does that sound like a normal bracket motor on a two step, or is there some other msd rev limiter? How would you do this on a car without a...
could keeping your fuel (nitro or alcohol) inside your air conditioned trailer be considered artificial cooling? If so, I suspect we're all...
That sounds pretty good depending on how fast it can all happen. I think you'll be looking closer to 5-7 degrees of lift, though. That should...
I saw this on another forum. I really don't understand how it works, it says you set a "vertical" g-force threshold that, when crossed, will put...
