Separate names with a comma.
Looking fo a nice used (or new) Bryant 3.750 double keyway and a 3.850 double keyway. Thanks Murray moc@iinet.net.au
What's the go with the lump in the intake ports these days? Are you leaving them in or removing them? Cheers Murray
Hi guys, does anyone know someone that could transport a 9" rear end (maybe a pair of heads too) from Great Falls to Los Angeles for a reasonable...
Anyone know how Graham Ellis is doing?
Hey guys, where is the best place to buy a new wheel for my Van Norman clutch machine? The current one is a Radiac if that makes any difference....
How often do you guys replace the belts in these and who sells them? Thanks Murray
How many G's can you pull on a Hoosier 17x34.5x16 (Doorslammer) before tire slip overcomes forward drive? Thanks murray
Who sells Williams pans, covers etc? Thanks Murray
Heres a mathematical question for the resident gurus. If I have a Hemi with 10.4 comp and 55lbs boost, how much can I raise the static comp with a...
What is the current trend with Hemi flywheel bolts? Torque numbers, how many runs before replacing, how many runs before you need to recheck...
2700lb screw blown door car. always shows more tyre temp on left rear on launch. i thought this was showing more slip on left side than right side...
I'm about to order a new helmet and want to know which is the best speaker/mike set up to use. (want to get them factory fitted) Any opinions ?...
Is there any real benefit from running a crank support geardrive on my Hemi? 511 PSI Fathead deal, sees 10,000 regurlarly without one. Thanks Murray
Any one using a combination of 3 lock up levers and 3 normal? General concensus here is that it wont work so you have to use a 2 and 4 combo!
Don't know if this is the right spot to ask or not. Anyone know anything about the Grizzly Adams sponsored Fueller, circa 1982 ish. A picture...
I know they aren't a Bryant but do they hold up ok or not, looking at putting a low dollar deal together for a friend of mine and was unsure...
I've been running a TFX96 combo for the last few years and always had good oil pressure. (std Pleuger 2 stage pump, 50wt oil, 90lbs hot idle,...
Does anyone make carbon valve covers for the BAE fathead? Thanks Murray
