Separate names with a comma.
Could I still use the big battery and then get a smaller Braille for the starter circuit only? (12 volts for most of car, 24 for starter)
Hemi manifold to pan Purchase, CHECK EVERYTHING BEFORE YOU BUY!!!!! I really liked taking to him and totally trusted him on the engine I...
Difference in power/CFM , 2.375, 2.5, and 2.6 Veney heads, $$$ value difference? Wondering what the difference in power I could see on a 496...
Ok, understand..... I will sort it out 24 volts to the starter
Got it, thanks
So, 16 volts? or 24? Just throw the volts to the same starter?
Ok, I have been convinced that my MSD 10 won't cut the mustard on my Hemi/C rotor and that I need to dive in on a 44 Mag. So, next...
I am hoping it is the ignition not lighting things. I have plenty of fuel and it is getting out of the tank to somewhere......
It's a Bradco 2 piece billet, specifically for this application, Browell, Ried case, two speed 400....... Crap I am throwing money at this thing...
Thanks Brandon. Everything is pointing to my ignition. Point me in a direction for good prices? How long do coils last? I am totally new to...
Thanks for the reply. I ran the 10 on my BBC/14-71 for a long time. I am going to recheck phasing and make some financial decisions on the 44. The...
4.29 10 inch, M/T "bubba" 3190 34.5 stiff wall, 7.5psi, two step 4600, AFCO Big Guns rebound 6 from tight.
I am starting to line out my TFX/Veney C rotor convertor car and was wondering how much timing to pull off the line, my tuner guy said 20 out and...
Thanks, I posted on YB, Hutch and I are working through it. Scott
Shaking down the Hemi/C rotor/2 speed 400 at the track. I have run the car on jacks and driven a limited number of feet to check that all is well....
Edit.... I think I answered my own question..... Those passages in back are valley drains to the pan. Thanks anyway
Thanks Rich, Is there any merit to running an oil line from the pump to the top left port on the back of the block? I have read on a couple of...
I have a fitting off my inline oil filter, wet sump system..... reads plenty of oil pressure. Question???? Will any of the fittings on the...
Badbird, what kind of service life do you get? How many runs?
I am coming up on the service life of my 1" lifters in my TFX/Veney Hemi/C rotor. What lifter has been the best on service...
