Separate names with a comma.
I was trying to run 125 over, it threw belts all the time. I was advised to reduce the overdrive to 86 over to be easier on the belt.
I am having zero to low luck with belt life on my new screw combo. My 14mm belt are coming apart anytime I hit a rev limiter (two step or if I...
Wondering what tire the Pro-Extreme / Pro-Mod guys are running...... 16 x 16 wheel, currently with beadlocks. TIA
You PM'ed about belts, is your email working?
I am looking to change to 8mm from 14mm, have both big and small snouts for my C rotor. What length belt and tooth counts are guys running for...
Thanks Bruce, do you run the 8mm tight to? Any particular kind of belt better than others? I use Gates Poly Chains on the 14mm
I have been running 14mm with roots stuff for years, just went to screw. What is better about 8mm? I know a lot of guys run it, and 11mm too
I'll look, I think it would be pretty hard for the blower/crank to be far off, idler could be a different story. I'll check them all, thanks.
Throwing Blower belt on a Screw, Help We finally got to hit the track after working out some valve issues, and the blower belt is having trouble...
How about the "Bubba" tire, 3190 with the stiff sidewall???? Thinking 6.75 to 7 Hemi, screw, Bradco 400, 1.40 and 4.29 rear at 2700lbs
I will be starting a search for a clean, used block over the winter season. What are the best blocks and what lifter bore spacing for getting into...
Thanks for the reply, Will be using 24 volts for cranking and I thought that only same battery voltage was required. I would never run anything...
At the advice of everyone, I am moving from MSD 10 Plus to 44 Pro Mag for my TFX/Veney/C-Rotor Screw. I think this will be a good thing, but want...
John, Thanks for taking the time to talk with me this evening. I will sort out these heads and possibly secure spares if available. Great,...
Does anyone have any heads and all the gear required to make it run for sale???? All I hear is "we can do (x) in a week" I send my stuff in or...
I thought the intake had to change for the new Veney stuff.
Thanks, I have changed the lower pulley to run 125% over while the car is down. Yeah, I need to get my current program sorted out... Big...
Thanks, Tough to change platforms with all the cool magnesium parts, (intake, valve covers, gear drive cover, pump drive) but I will have to do...
I currently have Veney 2.375 fuel heads on 496 4.310 bore 496 TFX with a C Rotor. What kind of difference in power will I see? I know that I will...
I have doing lots of reading and sorting for my tune and get a wide variety of answers... There are other threads on this topic, I think this...
